sherlylock
rBotM Winner
- Feedback
- View
Peachy!":3gh60jza said:
I've been searching Google for ages for this frame painter you speak highly of!
(I'd assumed it was Argos...)
The faded Caramel beast......'82 Raleigh Gran Sport
- Thread starter sherlylock
- Start date
I've been searching Google for ages for this frame painter you speak highly of!
(I'd assumed it was Argos...)
chickendrumsticks
Senior Retro Guru
Re:
For what it's worth, I have always used Winsor & Newton's "Artists Acrylic Gloss UV Varnish", applied by brush. It dries to a perfectly clear finish, goes on nicely and there's a remover as well if you need it - althogh I've found that meths does the trick if you get a bit of a run during application. To be fair, I've only used it on tough old powder coat, but I'd say if it's OK for protecting artworks it won't harm bike paint. I've found the remover works brilliantly too if you happen to damage a sticker - or realise you've misplaced a new one after varnishing... And just a few quid a bottle!
For what it's worth, I have always used Winsor & Newton's "Artists Acrylic Gloss UV Varnish", applied by brush. It dries to a perfectly clear finish, goes on nicely and there's a remover as well if you need it - althogh I've found that meths does the trick if you get a bit of a run during application. To be fair, I've only used it on tough old powder coat, but I'd say if it's OK for protecting artworks it won't harm bike paint. I've found the remover works brilliantly too if you happen to damage a sticker - or realise you've misplaced a new one after varnishing... And just a few quid a bottle!
sherlylock
rBotM Winner
- Feedback
- View
Re: Re:
Ooo.....good tip. I have an old Raleigh roadster from 1950 that I've polished up and re-decalled with Hlloyd decals - might give it a try on that first! Cheers
chickendrumsticks":39d58web said:
Ooo.....good tip. I have an old Raleigh roadster from 1950 that I've polished up and re-decalled with Hlloyd decals - might give it a try on that first! Cheers
sherlylock
rBotM Winner
- Feedback
- View
Postie has brought a few bits, courtesy of the fine people of this forum after I'd posted up some wanted ads.
Got a few options on Suntour freewheels now - one from eBay and a couple from MatBH5 - cheers!
Seatpin bolts......a Campag that I bought on eBay (too small), a Campag from The Bat (cheers Kev!), an allen bolt from jim haseltine and a few Raleigh r-nut bolts from Corblimeyguv........and the original rusty allen bolt arrangement that came with the bike.
The only one that really fits the bill is the longer Campag bolt from Kev - it's a little on the short side but I can get several threads engaged to tighten it up so I think all is good.
Thanks to those people who have offered up bits to help me get this roadworthy so far - very much appreciated. The likelihood is that the bits I don't use on this project will get used on one of the other projects I have lurking in the shed!
Got a few options on Suntour freewheels now - one from eBay and a couple from MatBH5 - cheers!
Seatpin bolts......a Campag that I bought on eBay (too small), a Campag from The Bat (cheers Kev!), an allen bolt from jim haseltine and a few Raleigh r-nut bolts from Corblimeyguv........and the original rusty allen bolt arrangement that came with the bike.
The only one that really fits the bill is the longer Campag bolt from Kev - it's a little on the short side but I can get several threads engaged to tighten it up so I think all is good.
Thanks to those people who have offered up bits to help me get this roadworthy so far - very much appreciated. The likelihood is that the bits I don't use on this project will get used on one of the other projects I have lurking in the shed!
dorset boy
Senior Retro Guru
Attachments
sherlylock
rBotM Winner
- Feedback
- View
Re: Re:
Lovely bike! Can't wait for the first ride on mine when I see others like yours. Are they Mavic rims?
dorset boy":prhdutaz said:
Lovely bike! Can't wait for the first ride on mine when I see others like yours. Are they Mavic rims?
dorset boy
Senior Retro Guru
Re:
Thanks,yes they are Mavic rims Module E2.When i rode the bike in France the colour was complemented a few times so it must be chic !
Thanks,yes they are Mavic rims Module E2.When i rode the bike in France the colour was complemented a few times so it must be chic !
sherlylock
rBotM Winner
- Feedback
- View
Not a lot of progress of late.....been too busy with other stuff.
Did buy a saddle though.......cropped up on a Raleigh resto facebook page as a link to an eBay ad.
Took a punt on it as its an Iscaselle and it looked very similar to the Tornado saddle - bought just to rob it for its foam. Turns out that it shares the same plastic moulding as the Tornado so the foam is a perfect fit.
The original saddle from my bike is missing the leather/suede and the foam and is in a proper state.......and seeing how much Tornado saddles are going for - one finished on ebay tonight for £64 - £14 for a foam donor seemed like a good option.
Anyways......I've carefully removed the vinyl/foam from the donor saddle and it's a perfect fit on the Tornado. Just need to source an appropriate covering now to retrim it......
Awaiting dissection....
Foam separated........
Offered up to the naked Tornado........
Did buy a saddle though.......cropped up on a Raleigh resto facebook page as a link to an eBay ad.
Took a punt on it as its an Iscaselle and it looked very similar to the Tornado saddle - bought just to rob it for its foam. Turns out that it shares the same plastic moulding as the Tornado so the foam is a perfect fit.
The original saddle from my bike is missing the leather/suede and the foam and is in a proper state.......and seeing how much Tornado saddles are going for - one finished on ebay tonight for £64 - £14 for a foam donor seemed like a good option.
Anyways......I've carefully removed the vinyl/foam from the donor saddle and it's a perfect fit on the Tornado. Just need to source an appropriate covering now to retrim it......
Awaiting dissection....
Foam separated........
Offered up to the naked Tornado........
Peachy!
Retrobike Rider
BoTM Winner
Gold Trader
rBoTM Triple Crown
rBotM Winner
98+ BoTM Winner
Claud Butler Fan
VCC Claud Butler ME
- Feedback
- View
Have you thought of refreshing the vinyl?
viewtopic.php?f=1&t=415721
I’ve tried this product on vinyl and it works just as well as on leather...
viewtopic.php?f=1&t=415721
I’ve tried this product on vinyl and it works just as well as on leather...
sherlylock
rBotM Winner
- Feedback
- View
Peachy!":2s1a2ok2 said:
Looks like good stuff that - my boss used something similar on the steering wheel in his classic Saab and recommended it.
I think I want to change material though - thinking a different finish like suede or alcantara........undecided as yet. (but I think brown suede will edge it......)
Good results on that Flite though - lovely job.
Similar threads
