1994 Norco Rampage

[Ingola]

Dudes, you were warned on page one:

It'll be ready by springtime. Theoretically

Maybe over Christmas I'm off for two weeks

 

[Imlach]

*puts a pin in the handsome crusted doll's crotch*

Now now Matti.... reveal or repeal!

What have you got for me *dabs the dolls head with Canadian club and blows smoke unto it*

 

[MattiThundrrr]

Brought a box of goodies to Ingola's place for Buddies' Bike Building Day. There were a few setbacks, but we have a rolling chassis now. I can start hanging pieces

 

[MattiThundrrr]

My NOS FSA headset didn't fit and the plastic seals disintegrated during the install attempt, so we snagged the Cane Creek off Ingola's winter Norco. Also brought the 127 mm spindle UN54 BB by mistake, so we didn't put one in yet
We also struggled for a couple of hours with the stupid seat post. My 27.2 mm post would not fit so we tried his 27.2 and it did, but not with the clamp that came with the frame. It was squeezing the turd out of the top of the seat tube. Fresh grease in the rear too, with a bit of a setback involving mixed from his cassette getting mixed with mine for a while. We also had a problem with wrenches, every time one was put down, it would dissappear. Never to be found until the replacement tool was lost and we'd find the first one while hunting the second. Also, a fun visit at the pet store where the clerk thought we were more "together " than we are. But he wasn't wrong, the "Biggie" and "Small" matching beanies would be damned cute.

 

[MattiThundrrr]

*dabs the dolls head with Canadian club and blows smoke unto it*

Thanks for the help, Doctor, but you know we had a smoke ceremony or two on our own

 

[90's Ninja]

My NOS FSA headset didn't fit and the plastic seals disintegrated during the install attempt, so we snagged the Cane Creek off Ingola's winter Norco. Also brought the 127 mm spindle UN54 BB by mistake, so we didn't put one in yetView attachment 916453View attachment 916456View attachment 916457
We also struggled for a couple of hours with the stupid seat post. My 27.2 mm post would not fit so we tried his 27.2 and it did, but not with the clamp that came with the frame. It was squeezing the turd out of the top of the seat tube.

Pretty sure it takes a 27.0. Do you have one in your parts bin or do you need one? I have a few in my bin

Bike looks great with the black and those gumwall tires were a good choice

 

[MattiThundrrr]

Pretty sure it takes a 27.0. Do you have one in your parts bin or do you need one? I have a few in my bin

Bike looks great with the black and those gumwall tires were a good choice

There's a post in there now that I thought was 27.2. I'll have to check with calipers later. Those tires are from a trash day Supercycle, and way too slick to stay, but I've got a nice set of old Specialized Ground Control and Master with tan walls that should work nicely

 

[90's Ninja]

There's a post in there now that I thought was 27.2. I'll have to check with calipers later. Those tires are from a trash day Supercycle, and way too slick to stay, but I've got a nice set of old Specialized Ground Control and Master with tan walls that should work nicely

Ah, ok. I'm a fan of semi-slicks. Currently rolling on a set on my Kona and I find they get me to the brewery faster

Found these 27.0's in my parts bin. You can have the silver Norco post, just cover the shipping. The black is a NOS SR Sakae TCO and I could let that go for cheap