1992 Scott Super Evolution Project, (FINISHED!!)

[mikeekim89]

ok soo i got my laptop back from repair today soo pics that:ve been long kept waiting are here parts only till the weekend, i hope..

 

[mikeekim89]

more..

 

[mikeekim89]

if anyone has spare cages for these. message me, as i like the look of them but can't ride them without cages or clip adapters. but i don't really want to ride clips.

 

[mikeekim89]

Ok, so i'm going too my bike shed tonight, late night, i may build her up with the new parts tonight, or tomorrow morning, either way, so far as i know i'm still waiting on all my cables and a headset :? but it'll be a geared rolling chassis by the time this weekend's over. i could do with some new canti pads at some point and new tyres too, but it's very useable right now, i may go modern on the wheels soon though, as i came into some 12 spoke tioga things that are front disc (new hub) so i may lace these.

 

[mikeekim89]

Ok, So she's DONE!!! well for now, new saddle at somepoint, and new rear casette soonish, i have a few pics of it done, and a few pictures of the cave which is well stocked i think, for a 16 year old anyways, pics below

 

[mikeekim89]

Spec's

Frame: 1992 Scott Super Evolution

Fork: SR Suntour Cheapo's

Headset: Deore XT
Stem: Unknown
Handlebar: Club Roost Riser
Grips: Scott Grips
Barends: None

Brakes: Deore LX
Brake Pads: Umm...
Brake Cables: Umm...
Cantilever cable hangers: Deore LX
Brake Levers: STX RC

Shifters: STX RC
Front Derailleur: Deore XT M750
Rear Derailleur: Deore M750
Derailleur Cables: Umm...
Cassette: Shimano HG50, I think..
Chain: SRAM 7-8 Speed
Cranks: Deore XT M730
Crank Bolts: Umm...
Chainrings: Middleburn 46, 36
Chainring bolts: Deore LX i think
Bottom Bracket: Umm...
Pedals: LX Cages

Hub Skewers: Shimano
Rims: Mavic, Umm...
Hubs: Shimano Alivio
Nipples: Umm...
Spokes: Umm...
Tyres: Schwalbe
Tubes: Kenda

Saddle: Selle Italia
Seatpost: Umm...
Seatpost Binder: ACOR?

Weight: No Idea...

 

[marin man]

scott

Looking good mate,but your front mech is far too high,you will lose your chain over your top ring :!: move it down so the outer plate of the mech is about two mm above the outer ring and it will shift much nicer.
see picture.

 

[mikeekim89]

:shock: i did notice that i was losing the chain on the top ring, but it won't drop any lower at all, it's litterally on the weld for the BB, By the way, :evil: (spin envy )

 

[marin man]

scott

If you get a chance and a few quid you will have to replace that mech as it is the wrong type you need one with a higher bracket (above the adjusters and not below).p.s. spinergy,no spins here :shock:

 

[Defiant]

:shock: i did notice that i was losing the chain on the top ring, but it won't drop any lower at all, it's litterally on the weld for the BB

you need to use a different derrailleur