Team Marin, Mount Vision

[integerspin]

Having a clearout.

1992 Team Marin. 19"[20.25"]
Paint is tatty, not all original parts, I will put the spec later.
£200 I really don't want to be out in the rain tryin to box it so no post for now.
Pictures if there is any interest.

Mount Vision Pro frame, with thomson seatpost £55 posted.

**********sold **************
cocklobster

 

[Timoth27]

Re:

What size and year is the MVP, could I get some pics please. Dose it have a shock?

Thanks

Tim

 

[integerspin]

Re:

19" I think, better measure it, yes 19" centre to top of seat tube.
Seat tube clamp and a black Thomson seat post with it. But no shock.
Paint not great but I would be happy with it, I would have cleaned
the clag from around the bottle bolt holes and painted those bits with
epoxy primer. I was goin to get a shock but I have to get rid of a lot of stuff.
Hope the pics are OK, I can take more if needed.

 

[Timoth27]

Re:

Thanks integerspin unfortunately it’s the same size as I have, I was hoping for a larger size

 

[Meejoir]

Re:

19” was the largest size Marin did in this frame (a 1998 model) I think - and it is very big. I’m 6 ft and ride a 17.5” version of the same frame and it’s spot on. I tried the 19” version in the shop back in the day (Denton Cycles Newcastle - RIP) and it was way too big and I usually take a large. Marin’s sizing didn’t quite compute with other manufacturers!

 

[Meejoir]

Re:

PS if anyone needs the same swing arm in orange (v-brake only) let me know!

 

[Timoth27]

Re: Re:

19" I think, better measure it, yes 19" centre to top of seat tube.
Seat tube clamp and a black Thomson seat post with it. But no shock.
Paint not great but I would be happy with it, I would have cleaned
the clag from around the bottle bolt holes and painted those bits with
epoxy primer. I was goin to get a shock but I have to get rid of a lot of stuff.
Hope the pics are OK, I can take more if needed.

So been looking in the archive and it seems the head tube is the easiest way to tell if it’s a large, if you wouldn’t mind could you measure the head tube please, it may still be suitable?

Thanks
Tim

 

[integerspin]

Steering head is: 120mm.

 

[Timoth27]

Re:

Thanks integerspin as I suspected (according to the archive) that makes it a “17 which is the same as I have unfortunately.

 

[integerspin]

Measured in german inches?