Show us yer FSR's
- Thread starter Dangermouse
- Start date
lowslowandold
Retro Guru
Re:
Have taken my mine to wales a few times this year, and well going to complete strip down rebuild.
A local powder company I use for Jagaur parts said he would shot blast and powder coat my frame for £40 so going for a Kawasaki green with black highlights, new decals (where can I get them) single front ring, 10 speed (I don't know if I can do this please confirm) get my hope brakes serviced new hoses, as for shock and fronts not sure have marzoocchi bomber jr t, and a for float rear would like to get more travel so may have to source a betd linkage? Suggestions welcome please
Have taken my mine to wales a few times this year, and well going to complete strip down rebuild.
A local powder company I use for Jagaur parts said he would shot blast and powder coat my frame for £40 so going for a Kawasaki green with black highlights, new decals (where can I get them) single front ring, 10 speed (I don't know if I can do this please confirm) get my hope brakes serviced new hoses, as for shock and fronts not sure have marzoocchi bomber jr t, and a for float rear would like to get more travel so may have to source a betd linkage? Suggestions welcome please
Should be able to run a 10 speed setup provided the hub is 135mm spacing.
Jr T's work pretty well, but you'd need to get a BETD link to change the head angle and BB height otherwise the handling will really suffer.
BETD still make the links btw.
Or you could get the Pièce de résistance of FSR upgrades http://risseracing.com/store/product_in ... cts_id/266
Jr T's work pretty well, but you'd need to get a BETD link to change the head angle and BB height otherwise the handling will really suffer.
BETD still make the links btw.
Or you could get the Pièce de résistance of FSR upgrades http://risseracing.com/store/product_in ... cts_id/266
lowslowandold
Retro Guru
Re:
Thanks proper bike porn, will measure the spacing to see if it will take 10 speed
Thanks proper bike porn, will measure the spacing to see if it will take 10 speed
lowslowandold
Retro Guru
Where can I get re prints or original decal set?
lowslowandold
Retro Guru
Will do mate, need to strip the frame and send my brakes away to be serviced new black bits, single front ring (suggestions please)
Giggity
Dirt Disciple
Re:
Personally, I wouldn't have my frame powder coated. It adds weight as well as thickness where it doesn't need to be, such as inside threads, bearing/bushing press in surfaces, dropouts, etc. I have seen, over a few decades, to many people do it to motorcycle frames only to hate it afterward.
If where me, I would take advantage of the aluminum frame and look more into anodizing.
Personally, I wouldn't have my frame powder coated. It adds weight as well as thickness where it doesn't need to be, such as inside threads, bearing/bushing press in surfaces, dropouts, etc. I have seen, over a few decades, to many people do it to motorcycle frames only to hate it afterward.
If where me, I would take advantage of the aluminum frame and look more into anodizing.
Similar threads
- Sticky
