Lightest Steel Frame?

Experience tells me not to trust a manufacturer for bike weight.

Or most other features...

I suspect they've taken the tyres offšŸ¤£

Actually, you may well be correct. During the first years after WWII decent bicycle tyres were very hard to get in France, and the rule makers at the Concours de Machines, where weight was an important consideration, decided it would be fairer to compare the entrants without tyres.

So yes, a bike weight published in 1949 is probably without tyres.
 
iip
The 853 lemond frame has been purloined by my wife, she knows a good thing when she sees it... I've given it a whirl around the lanes even though it's too small, you can tell it's stiff and very responsive. With the right stuff on it you could easily get it down to fifteen pounds plus. It's fillet brazed which I suppose saves a bit of weight, but when you pick up the bare frame everything in your head is going ' I can't believe it's not carbon" I once had an Ellis Briggs which was silver soldered 653 and that was incredibly light.

Always had a soft spot for 653, a very much overlooked tube set.

i have moved in with my parents to take care of them. my 853 lemond was what i brought from my house. enjoyable indeed

not the lightest i ride but very close IMG_2624.png
 
Last edited:
Lightest Steel bike in the world: 5.42kg, Tange Ultimate tubing, .35 thinnest part, not too bad compared to 753. Frame weight 1250gr. All the lightweight stuff is mostly Taiwanese from a new manufacturer BKing, the gears are SRAM Red eTap. I like it! The guy reviewing it (a hill sprinter) reckons with the right lightweight kit easily under 4.5kg (9.9lbs!)
 

Attachments

  • IMG_20241114_113113.jpg
    IMG_20241114_113113.jpg
    209.2 KB · Views: 13
  • IMG_20241114_113125.jpg
    IMG_20241114_113125.jpg
    125.2 KB · Views: 12
  • IMG_20241114_113138.jpg
    IMG_20241114_113138.jpg
    144.9 KB · Views: 10
  • IMG_20241114_113158.jpg
    IMG_20241114_113158.jpg
    159.4 KB · Views: 7
  • IMG_20241114_113215.jpg
    IMG_20241114_113215.jpg
    247.4 KB · Views: 7
  • IMG_20241114_113229.jpg
    IMG_20241114_113229.jpg
    239.3 KB · Views: 9
Obviously it's Japanese, by Yasujiro Svelte. I reckon if this was marketed right it could compete with a whole swathe of carbon bikes. Steel, what's not to like!
 
I wonder if there are any specialist requirements for frame builders to put together an Ultimate tube set? There don't appear to be any weight limits on it either. Interesting.....šŸ˜²
 
Back
Top