The chainring is a 34T Stridsland chainring, one of the only narrow wide options for 94bcd. Matias is based in Denmark, and is a cool guy. They're on the expensive side but I managed to find mine second hand!What chainrings are you using?
The forks should be good! I didn't ride them pre-service, which in hindsight would have been a good idea. I've only heard good things about them, the BAM is the lightest of the Z2 series I believe. It's also got 30mm less travel (and costs a lot less) than the Z1. I was concerned about altering the handling of the bike too much, so the 80mm travel should suit me nicely.
Me and my friend Ollie really struggled getting the seals out of the forks, looks like "7 years in the loft" (according to previous deceitful owner) hadn't done the rubber any favours. Heating the lowers in boiling water did the trick alongside a couple of hours of prying with a long screwdriver. Internals on one side seemed fine, but the other was very dirty! A bit of wear on the stanchion might be the culprit, but looking to remedy that with some nail polish.
Left side/right side
New seals from @kraeMit should be coming in the next few days, then it's a case of fitting and riding. Will update on progress!