Why yes it is. 1991 GT zaskar

Adding a few before pictures from Dablks original thread.

I'm a bit stalled on the build waiting for the forks bars and stem to come back from the paint shop.

New decals have arrived and been fitted and if it ever stops raining I'll take some pictures.

IMG_7617.jpeg


IMG_7635.jpeg
 
There a couple of bits I'm not happy with. Ideally I'd have newer front brakes, and the mech hanger is a bit mis aligned.

I don't have the tool to deal with that, so it will go to my local shop when I get a chance

PXL_20230820_113408676.jpg
 
If it was me, I'd stick with the current cantilevers, they match the brake levers & thumbies and look more retro! I'd lower the cable hanger to say bottom of the steerer/unicrown to give you more oomph/better feel. It looks like you have enough cable to do that. The big S rolled out the low profile cantilevers with STi push/push shifters and Servowave brake levers which is why I think the M730 cantilevers are a better match. It's all very subjective though! ;)

Good luck getting the rear hanger alignment checked.
 
Back
Top