Why yes it is. 1991 GT zaskar

[raidan73]

Well I think those will do quite nicely. Ritchey expert runs rims with black xt rear hub and early pace front chest courtesy of @clockwork davo .

View attachment 760987
View attachment 760997

Those wheels have certainly done the rounds. They were mine, many moons ago. Very nice they are too

 

[slackboy]

Those wheels have certainly done the rounds

That's good to know, they've been well looked after.

Its like they are being passed around retrobike as an asset in the same way that Chinese billionaires pass around Manchester apartment blocks.

 

[slackboy]

Adding a few before pictures from Dablks original thread.

I'm a bit stalled on the build waiting for the forks bars and stem to come back from the paint shop.

New decals have arrived and been fitted and if it ever stops raining I'll take some pictures.

 

[slackboy]

Forks and stem are back from paint and looking minty.

 

[PhillB]

Look sharp!! Will be good to see them on the Zaskar!

 

[slackboy]

Look sharp!! Will be good to see them on the Zaskar!

Your wish is my command!

 

[27motorhead]

Looks like it's raining again! If it rains enough it can help you slide the decals into just the right position

 

[slackboy]

Been away for a couple of weeks and have only just got around to cabling this up. I might even ride it at some point.

 

[slackboy]

There a couple of bits I'm not happy with. Ideally I'd have newer front brakes, and the mech hanger is a bit mis aligned.

I don't have the tool to deal with that, so it will go to my local shop when I get a chance

 

[27motorhead]

If it was me, I'd stick with the current cantilevers, they match the brake levers & thumbies and look more retro! I'd lower the cable hanger to say bottom of the steerer/unicrown to give you more oomph/better feel. It looks like you have enough cable to do that. The big S rolled out the low profile cantilevers with STi push/push shifters and Servowave brake levers which is why I think the M730 cantilevers are a better match. It's all very subjective though!

Good luck getting the rear hanger alignment checked.