Why? Just why?

[ishaw]

Thought I'd start a thread after coming across this. Why would someone do this? What's the point?

Feel free to post other examples of weird, pointless stuff and bodges you've inherited or come across during your bike building journeys.

In this example, what's the point? Benefit? Want to add needless weight with no added benefit. Here's how.

 

[ishaw]

There's also this. A huge bit of threaded metal used to replace a nut. Why goddamit, why?

 

[greencat]

Thought I'd start a thread after coming across this. Why would someone do this? What's the point?

Feel free to post other examples of weird, pointless stuff and bodges you've inherited or come across during your bike building journeys.

In this example, what's the point? Benefit? Want to add needless weight with no added benefit. Here's how.

There will be a reason. It might not make any sense to others, but.... Perhaps someone had a bad experience with a valve stem ripping off, or the aesthetics didn't feel right with only one locking nut.

People are bloody weird.

 

[Lucidone]

Thought I'd start a thread after coming across this. Why would someone do this? What's the point?

Feel free to post other examples of weird, pointless stuff and bodges you've inherited or come across during your bike building journeys.

In this example, what's the point? Benefit? Want to add needless weight with no added benefit. Here's how.

Wheel balancing obviously!

Confession time:
I was setting up gears for a friend of the better half yesterday (misaligned FD was worst culprit). When spinning up the back wheel in the stand noticed how out of balance the back wheel was (tyre seated correctly). I had a fiddle with the redundant Speedo magnet (no Speedo fitted) and enjoyed a couple of minutes finding the most effective spoke and then radius and managed to achieve both a balanced wheel and mind!

 

[bikeworkshop]

Some people struggle to throw things away...
And we can all accumulate presta valve collars.

We keep ours in a little drawer on the upstairs work bench. it holds a couple of hundred.
He (surely) keeps his on the Presta valve stem.

Next time he will need a long valve tube

 

[bikeworkshop]

https://www.ebay.co.uk/itm/18652932...-b8eb-6674c60da2c6|iid:1|vlpname:vlp_homepage
People designed this,
People built it,
Marketed it
Bought it

 

[Lucidone]

Like the 'Thru-Bolt' axles - touch of class!

 

[ishaw]

I didn’t have any shift cable ferrules left so I used brake ferrules and wrapped the shift housing in hockey tape so it fit more snuggly in the ferrules
View attachment 864159

That makes sense. A slight bodge, but serves a purpose and arguably does as good a job as the right ferrule.

Looking for more left field weird and absurd entries.

 

[ishaw]

https://www.ebay.co.uk/itm/18652932...-b8eb-6674c60da2c6|iid:1|vlpname:vlp_homepage
People designed this,
People built it,
Marketed it
Bought it

Slap a Chinese bought e-bike conversion and a rider with no bike or road sense at all, you've got practically every poober eats, just Sh*te and deluverpoo delivery person nailed. They ride some crap to match their bike skills don't they.

 

[Dogsbolx94]

Here’s one bodge I made for the Dogsbolx. A chain suck device made from a cut down Ringle original. I had bolt mounts fitted to the chain stay when the Bike frame was made. I also cut down chain side plates stacked onto the mounting bolts to act as guides for the derailleur cable to line up with the chain stay.