Track Frame ID

[aeroBLOKE]

Okay. I need your help.

I have a track frame and I would like to identify it.

Previous seller had very little information in regards to who built it.

Key Features.

• 
  'Champion' stamped into Bottom Bracket
  316 and 57 or 59 stamped on the other side
  Fork Steerer is also stamped 316
  Front and rear 'Shimano SFP 10 Dropouts'
  VeloBase.com - View Single Frame Part
  Double Crown Track forks with orange stripe stickers on top of the fork crown on either side.
  Wrap over seat stays
  Open ended? seat stays near the dropouts
  27.2mm seatpost
  26.4 Crown Race
  English Threaded Bottom Bracket
  Really Tight Clearances, Less then 1cm on fork crown to tyre and wheel to down tube. And the same from the rear wheel to seat tube.
  
  It came with a zeus headset installed and a sugino Bottom Bracket
  

Any information would be helpful.The lugs seem to be pretty common. I think the tubing may be tange, as Tange made Champion bottom brackets I think..

I will email the guy I bought it of and see if he remembers anything.

 

[aeroBLOKE]

bump

 

[Banashapan]

Your best bet is to head across to lfgss forum, some proper track and fixed nuts over there...Theres a specific identify my bike bits thread and someone should be able to shed some light on it...

Good luck with your investigating.