sure. the frame is 56.5 cm square with a 74 degree st angle and 73 ht. i requested top tube routing with full housing to the rear derailleur down the chainstay. There are no provisions for a front derailleur. it was made by a good friend of mine about a year and a half ago. hes been building bikes for 14 years but just as a hobby. the fork is a wound up fork, which i like a lot, its very stiff and strong, and has good mud clearance.
I hand built the wheels with pewter anodized chris king cross hubs laced 3x with dt swiss double butted spokes to ceramic open pros (durable and extra braking power, woo!). There is a WTB Interwolf (700x3
tire on the front, and a WTB Crosswolf (700x32) on the rear.
The shifters are campy record 9 speed running through a jtek shiftmate to an XTR shadow derailleur. The cassette is XT 11-32. The front ring is a 46t TA ring on an FSA SLK Carbon crank with a bash guard from cyclocrossworld.com. There is an ngear jump start chain keeper to keep the ring from falling to the inside.
The front brake is a paul components neo retro, and the rear is a touring canti, also from paul. I got the moon units on there too, because they're neat. I have paul cross levers on there, too. The bars are deda newton shallow, and the stem is a deda newton as well. The post is a thomson elite, and the saddle is a ti railed rolls. The only change I've made since this photo is I redid all the housing with Yokozuna Reaction cables, which I highly recommend as an inexpensive upgrade to any bike.
The bottle cage is by Nitto, and the pedals are Time Atac XS.
I think that covers everything.
