Raleigh Dyna-Tech 1992 Adrian Timmis

mtbkez

Dyna-Tech Fan
My recently acquired Dyna-Tech from @Rkmonty75. Is a EX Raleigh Team bike as ridden by Adrian Timmis which is believed to have been used in the 1992 race season. Hopefully by starting this thread I will find out a little more about this bikes history and hopefully decide a route to go with this great piece of 90’s MTB history IMG_5483.jpeg
 
IMG_5468.jpeg
Made a few little touch up’s and found Ral 5005 Signal Blue a close match. Also started a bit of maintenance stripped and inspected headset and it’s fair to say it’s seen better days so a good clean and some fresh grease for now next up is the hope front hub bearings
 
My next job to tackle is the front hub bearing Anyone have any idea of the size of bearings used in the hope titanium front hubs
 
Thanks I will have to have a look i don’t think there’s a model number on the hub ? Just says hope titanium
 
There will usually be a code on the press fit bearings themselves ..you probably have to remove them to find it though.
 
View attachment 865741
Made a few little touch up’s and found Ral 5005 Signal Blue a close match. Also started a bit of maintenance stripped and inspected headset and it’s fair to say it’s seen better days so a good clean and some fresh grease for now next up is the hope front hub bearings
That Blue is pretty similar to my Dyna-Tech 755Ti (1995) Road bike, but maybe it's the light! I've got a plan to clean up and touch up my frame and forks. Do you still think the RAL 5005 has done the job well enough and looking at my photos, do you think they're close enough? Cheers
 

Attachments

  • djN8BJ2HScWprur5o90ARg.jpg
    djN8BJ2HScWprur5o90ARg.jpg
    827 KB · Views: 11
  • fullsizeoutput_2cb8.jpeg
    fullsizeoutput_2cb8.jpeg
    888.5 KB · Views: 11

Latest posts

Back
Top