Lightening my Spark 10!....Now Sub 20lb
- Thread starter wadsy
- Start date
Frankenorange
Orange 🍊 Fan
If the pedals are Look X Tracks you can make them one sided. Well one and a half, to be exact. Just un-bolt one end and prise out the springy gubbins. It still leaves the solid part of the clip system so you can engage the front of a cleat, from standstill.
I made this mod to mine as one side of these pedals always seems to have less slop than the other and i prefer the more sloppy side. I didn't weigh the pedals after the mod but they are alot lighter.
Regarding stems; the least number of grams for not alot of money is the Kalloy Uno. This one
https://www.litebike.cc/product-pag...MIi8P69q_1hgMVWLKDBx07cgeoEAQYASABEgJjePD_BwE
They are as light as the weenies say and they do not flex, or snap at the sight of roots and ruts. I think i remember right that my 100mm , with ti bolts, came in at 94g and cost about £25, from a chap on LFGSS.
You haven't mentioned bottle cages but i like Elite Leggero carbon cages. They are super light and don't eject bottles. You can also take a large half round file to the front bit of the cage, that hooks into the bottle(i use Elite bottles), to make entry/exit easier without impacting the retention. It files very easily so be careful and do it wet for the carbon/resin dust.
I made this mod to mine as one side of these pedals always seems to have less slop than the other and i prefer the more sloppy side. I didn't weigh the pedals after the mod but they are alot lighter.
Regarding stems; the least number of grams for not alot of money is the Kalloy Uno. This one
https://www.litebike.cc/product-pag...MIi8P69q_1hgMVWLKDBx07cgeoEAQYASABEgJjePD_BwE
They are as light as the weenies say and they do not flex, or snap at the sight of roots and ruts. I think i remember right that my 100mm , with ti bolts, came in at 94g and cost about £25, from a chap on LFGSS.
You haven't mentioned bottle cages but i like Elite Leggero carbon cages. They are super light and don't eject bottles. You can also take a large half round file to the front bit of the cage, that hooks into the bottle(i use Elite bottles), to make entry/exit easier without impacting the retention. It files very easily so be careful and do it wet for the carbon/resin dust.
Now fully rebuilt!
Pics and full spec below...
Frame: Spark 10
Grips: 34/30 tapered - Now Ritchey WCS
Bar: Renthal Carbon Lite riser - 40mm rise, which I like!... cut to 68cm
Stem: Ritchey wcs 31.8 - Now Easton EC90
Shifters: xtr m970 (3x9) - Now Sram XX 1x11
Brakes: Formula R1
Headset: integrated
Fork: SID - Now Magura Durin MD100 SL
Wheels: Hope Pro II + Stans Crest - Now Hope spxc 6 pro on Crests
Discs: KCNC razor: 160/140mm + titanium bolts
QRs: Mavic - Now Mavic titanium
Tyres: Rocket Ron 2.25 TR - Now Rocket Ron 2.1 TR
Chainset: XTR M970 triple - Now Sram X0 single
BB: FSA Mega iirc!
Pedals: Look carbon/titanium - Now Eggbeater Titanium
Chain: KMC 9SL - Now 11sl
Cassette: xtr m970 - Now Sram XX 11 speed
RD: xtr m972 - Now Sram XX
Seatpost: Rtichey wcs carbon - steel bolts replaced with titanium
Saddle: Flite SLR - Now Fizik Gobi carbon
Pics and full spec below...
Frame: Spark 10
Grips: 34/30 tapered - Now Ritchey WCS
Bar: Renthal Carbon Lite riser - 40mm rise, which I like!... cut to 68cm
Stem: Ritchey wcs 31.8 - Now Easton EC90
Shifters: xtr m970 (3x9) - Now Sram XX 1x11
Brakes: Formula R1
Headset: integrated
Fork: SID - Now Magura Durin MD100 SL
Wheels: Hope Pro II + Stans Crest - Now Hope spxc 6 pro on Crests
Discs: KCNC razor: 160/140mm + titanium bolts
QRs: Mavic - Now Mavic titanium
Tyres: Rocket Ron 2.25 TR - Now Rocket Ron 2.1 TR
Chainset: XTR M970 triple - Now Sram X0 single
BB: FSA Mega iirc!
Pedals: Look carbon/titanium - Now Eggbeater Titanium
Chain: KMC 9SL - Now 11sl
Cassette: xtr m970 - Now Sram XX 11 speed
RD: xtr m972 - Now Sram XX
Seatpost: Rtichey wcs carbon - steel bolts replaced with titanium
Saddle: Flite SLR - Now Fizik Gobi carbon
Last edited:
