kelloggs pro tour

Spokesmann":11h7321x said:
Chute55uk":11h7321x said:
well took it out for a 40 mile spin today, loved it.

Great looking bike and photo... :D
Wow coming from you that's some compliment, while your on the line Mr spokesman any recommendations for wider bars (on a budget)?
 
Re:Kellogg's Pro Tour

Here's me and my Kelloggs Pro Tour on the Holme moss summit. I actually did it twice once on the KPT and the on my MTB, although time wise on the there were not much between the 2 literally seconds between them, mtb had the edge, in all fairness to the Kelloggs bike it was my first proper ride on it and not being used to the ride position, suicide shifters etc it did rather well. I am pleased to bits with it.

The RSP bars are 31.8mm oversize clamp fitting http://www.ebay.co.uk/itm/181392573221? ... 1497.l2648 ,

I'm getting a 22.2 quill to aheadset adaptor http://www.ebay.co.uk/itm/181404421850? ... 1497.l2648 ,

and the RSP 110mm reach stem is the aheadset oversize type. http://www.ebay.co.uk/itm/300848190172? ... 1497.l2648
 

Attachments

  • raleigh_kelloggs_pro_tour_holme_moss_summit.jpg
    raleigh_kelloggs_pro_tour_holme_moss_summit.jpg
    203.7 KB · Views: 916
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
RSP bars and Stem came today. also changed the crank (again ;) ) and fitted aero levers.

Full Spec (Today's Edit 25/05/14 :roll: )
1988 Raliegh Kellogg's Pro Tour
Shimano Tiagra 30/42/52 Chainset
Shimano Tiagra Aero Brake Levers
Shimano Tiagra Dual Pivot Brake Calipers
Shimano Tiagra S.I.S (rear)/Light action (front) 3x8 speed Shifters
White outer Brake Cables
Shimano Tourney Direct mount Rear Derailleur
Shimano Deore Triple Front Derailleur
Shimano SPD pedals
Sunrace 13/15/17/19/21/24/28/32 Screw on 8 Speed freewheel
Sram PC970 chain/Power link
Weinmann XR18 rims 700c Quando QR Hubs
Swalbe Laguna 700x23c tyres
Raleigh RSP Pro Race Lightweight Road Cycling Saddle with CrN/Titanium Rails
Raleigh RSP Frame fit pump
Raleigh RSP White Aero bars 42cm wide
Raleigh RSP White 1-1/8" stem clamp with oversize 31.8 handlebar 4 bolt clamp, 110mm reach
Zenith 1" to 1-1/8" Alloy quill to aheadset adaptor
Giant XTC microshift Alloy seat post

Original Spec (as I bought it)
Weinmain 116 Alloy wheel front (rear aftermarket made of chocolate odd bod alloy)
Weinmann 570 side pull calipers
Weinmann Alloy brake levers
SR Custom 42/52 chainwheel
SR Custom 60mm reach Stem
Raleigh engraved alloy handlebars
Raleigh White aero friction shifters
Maillard? 14/24 6 speed freewheel (24 spline, unbranded?)
Sachs Huret Derailleurs (front and rear)
White Seat and fluted alloy seat post
 

Attachments

  • SAM_1867a.jpg
    SAM_1867a.jpg
    112.8 KB · Views: 870
  • SAM_1817a.jpg
    SAM_1817a.jpg
    83 KB · Views: 869
  • 20140413_100526a.jpg
    20140413_100526a.jpg
    78.6 KB · Views: 870
Well I've been playing around with the old KPT again :facepalm: , fitted a Shimano 105 rear Mech. Freewheel out and in with the Shimano hub/Freehub and Sram PG-850 Cassette, got a couple of them depending on the ride (yep I'm a wimp :roll: ). Back to the red handlebar tape. Shimano Claris 3x8 brake/shifter thingy's. New decals have arrived and saved for a rainy day when I get around to getting the paintwork sorted.
 

Attachments

  • SAM_1901.JPG
    SAM_1901.JPG
    88 KB · Views: 822
  • SAM_1902.JPG
    SAM_1902.JPG
    111.8 KB · Views: 822
  • SAM_1904.JPG
    SAM_1904.JPG
    80.8 KB · Views: 821
  • SAM_1906.JPG
    SAM_1906.JPG
    87.5 KB · Views: 822
As someone from a certain bike manufacturer said to me only today...

"glad you are spreading the good name of the Heron"
 
MrW":39gb1rnu said:
As someone from a certain bike manufacturer said to me only today...

"glad you are spreading the good name of the Heron"

I could have bought a new bike off the shelf...but I would have only took it to bits and rebuilt it a different spec lol, I love the old Raleigh racers of 80's era, I saved this one from being scrapped, although I had no intention of modernizing it initially, but you swap one thing then another thing then another :shock: , before you know it.. you have a new bike in an old frame and another old raleigh is back on the road lol :p
 
big_dave":3ubg0pzu said:
I could have bought a new bike off the shelf...but I would have only took it to bits and rebuilt it a different spec lol, I love the old Raleigh racers of 80's era, I saved this one from being scrapped, although I had no intention of modernizing it initially, but you swap one thing then another thing then another :shock: , before you know it.. you have a new bike in an old frame and another old raleigh is back on the road lol :p

Trust me on this, Nottingham is watching you... and they know you are doing the right thing!!
 
Back
Top