Hope disc timeline
- Thread starter crud
- Start date
Righto TK
One of it in 2 bits and one of it assembled
As you can see the bearings slide on quite easily but are still a very close fit,the last bearing would need pressed on :?
I thought it might be for a bulb but for the fact it was fitted to the Ti-glide :?
What do you reckon ?
The longer section has 2 flats machined onto it ,i suppose for bolting it in tight :?
The bearings were new[just dirty from my storage box]and as it was fitted to the hub that was new then i reckon they always went together. :? .
Who built it remains the question and as anyone that has been on RB for a while will tell you-Some parts we will never know the history of
[Spacers might be the wrong way around,i cant remember how they sat)
One of it in 2 bits and one of it assembled
As you can see the bearings slide on quite easily but are still a very close fit,the last bearing would need pressed on :?
I thought it might be for a bulb but for the fact it was fitted to the Ti-glide :?
What do you reckon ?
The longer section has 2 flats machined onto it ,i suppose for bolting it in tight :?
The bearings were new[just dirty from my storage box]and as it was fitted to the hub that was new then i reckon they always went together. :? .
Who built it remains the question and as anyone that has been on RB for a while will tell you-Some parts we will never know the history of
[Spacers might be the wrong way around,i cant remember how they sat)
Attachments
secret_squirrel
Senior Retro Guru
- Feedback
- View
Does anyone have a definitive listing of the Hope C2 caliper half numbers?
This seems to have vanished from the hope site in the last couple of years.
This seems to have vanished from the hope site in the last couple of years.
secret_squirrel":20lr6jga said:
http://web.archive.org/web/200406051054 ... _index.htm
This section-[bottom of page]- Standard Brake Fitting Information
secret_squirrel
Senior Retro Guru
- Feedback
- View
Oooo nice I picked up the same for manitous the other day. Will put up a pick for completeness - although only the fork bracket is different.
