Graphics Shack - Retro MTB decals

Just to try and explain this, I have not seen the decals in question but would guess they are printed on a white base digital media (80mic) and then have a clear laminate (80mic) applied over the top, this will protect the print but will give you a thick decal

I only print on a 50mic Cast vinyl and then clear coat with a 30mic laminate if required.

In most cases the decals are left un-laminated, this is fine if the decals are going to be lacquered as part of the paint process or are in "low-wear" areas. However if the frame is going to get a lot of use or they are a full top tube print I tend to laminate these to give a little more protection, I am thinking of the Bonty OR decals as an example

Hope this explains it a little more :)
 
Re: Graphic Shack decals ??

noya":ajwjnttq said:
Well, I'm sorry to say that I now regret having paid for Garry's Kona Cindercone decals, as advertised on ebay. Like the rest of his decals I've seen from all your photos, the decals received are very thick. Any type of clear coating will look odd over these (as with the Orange frame photo'd in this chat). I mailed Garry about this. In his reply, he mentioned giving me a 'sample' of something else which is thinner. This was almost 2 months ago. A further 5 mails have had no reply and I have not received any type of sample. So can't say that I would recommend GraphicShack, customer service is pretty poor and as mentioned, the decals don't do what it says on the tin. Very dissapointed.


Konas, Oranges, Yates, Yetis, Roberts......all done by Garry at graphic shack, some examples of which are shown in this thread, and all are perfect, actually more than perfect, in my eyes. And covered in clear coat.

And whilst i appreciate no one is infallable, and mistakes do happen, I cannot accept that Garry would not find a way to get you sorted, even if it was a generic ebay kit.

Perhaps you should post a pic for all to see...?

Im pretty sure it wont be any different than that of the decals i have on the kona below, (or the other examples ive shown)
( done by Garry as a special order in my colours, and laminated,
the colours/sizes/widths etc all spot on. And then i asked him to manufacture/replicate the original Fox decals, in custom colours too, as you can see the results are superb, and after several months of use, are still in perfect order)

And to be fair, why dont people use the phone anymore....? why email, just give the fella a ring.....? :roll:

I think its a sad day when someone finds it easier to Run someone down, give them a good public flogging, rather than actually pick up the phone, and sort it out like men. ( and no i dont see it makes any difference where in the world you live).

And on a side note, i do use Gil_M too, and have had some exceptional work done there too, i have also had a couple of slight mishaps, that were of course put right, but as i say communication is everything...., and no i certainly wouldnt want to bad mouth someone for a simple mistake, and potentially harm there business and possibly take food off there table. :roll:

But what i find totally rediculous is.....how come you bought a set of decals in september of last year for £17.00, and didnt use one of the two telephone numbers on the website to contact, straight away....why did you wait till January this year to start sending emails, and yet still not pick up the phone and make a simple phone call.....??? thus enabling you to resolve the situation.....!!!!!

I am personnally furious to be "frank", you are clearly not an active contributing member on this site, (judging by your posts and involvement since joining,) and yet because you cant pick up the phone and sort out a problem, that you personnally have made worse, you think its acceptable to come on here and slag someone off.

there are very few people doing this sort of work for the retro bike community, thankfully we have had Gil for a long time, but i suspect very much like Garry, Gil gets laden down with work as well.

We need all the help we can get with the restorations of these machines, and im sorry its idiots like you, that make it harder for the rest of us,

I for one am very thankful for all the work Garry has done, and i hope he continues with all the good work he does.

Examples below are of Paintwork, decals, and clear coat, all carried out by Garry at graphic shack.
 

Attachments

  • custom_colours_and_laminated_no_lacquer_over_paint_291.jpg
    custom_colours_and_laminated_no_lacquer_over_paint_291.jpg
    32.7 KB · Views: 916
  • 003.JPG
    003.JPG
    66.6 KB · Views: 916
  • Dave Yates Diablo.jpg
    Dave Yates Diablo.jpg
    189.9 KB · Views: 916
  • the diablo cable hanger,.JPG
    the diablo cable hanger,.JPG
    101.4 KB · Views: 916
noya":2aqaf0aq said:
Cheers for the info Gil !!!

So you cant give an answer as to why you didnt pick up the phone, and ring the person you spent money with then.....???

Or even better give a reason as to why it took you from september last year till january this year to send an email.....AND STILL not contact the person and speak first hand.

Sorry fella you make me SICK. and FWIW i think you are spineless.
 
Re: Graphic Shack decals ??

Bit harsh Sinnerman. Considering all the information you have about the order and the price, I am wondering if in fact you are Garry in disguise.
If you think that having sent 6 emails out, I am supposed to be happy, then fair enough. I have not insulted Garry but I cannot say that I am happy with the decals, that's it. If people want thick decals which will never be level after a respray, then fair enough.
Now stop ranting and insulting me and get on with it.
 
Im not getting involved but name calling and judging posters on their number of posts has no relevance to the argument either way.
 
Re: Graphic Shack decals ??

noya":11ajj3m8 said:
Bit harsh Sinnerman. Considering all the information you have about the order and the price, I am wondering if in fact you are Garry in disguise.
If you think that having sent 6 emails out, I am supposed to be happy, then fair enough. I have not insulted Garry but I cannot say that I am happy with the decals, that's it. If people want thick decals which will never be level after a respray, then fair enough.
Now stop ranting and insulting me and get on with it.

No mate, i just dont think its needed, for the length of time it took you to right your post on the subjuect you could have rang the bloke. and sorted it out straight away.

But then you could have done that when you bought them in september, instead of leaving it till you were clearly needing to moan about something, in january.

And to be fair mate, i dont think i need to prove to you i get on with it, do you. :roll:
 
coomber":2gzl7z4i said:
Im not getting involved but name calling and judging posters on their number of posts has no relevance to the argument either way.

No mate, no one is judging anyone by there number of posts, but to be fair both of his posts, are ref decals, and nothing else.......nothing, not even "thats a nice Kona" nitto, sod all.

But its alright to come on here and run someone down, "even though" they could have sorted it out months ago, without the need to try and needlessly Blacken someones name.

This whole thing stinks to high heaven.
 
sinnerman":o7uix4mt said:
coomber":o7uix4mt said:
Im not getting involved but name calling and judging posters on their number of posts has no relevance to the argument either way.

No mate, no one is judging anyone by there number of posts, but to be fair both of his posts, are ref decals, and nothing else.......nothing, not even "thats a nice Kona" nitto, sod all.

But its alright to come on here and run someone down, "even though" they could have sorted it out months ago, without the need to try and needlessly Blacken someones name.

This whole thing stinks to high heaven.

+1

Harsh but fair, unfortunately if someone searches for Graphics shack they may find this thread and be put off, all because someone was too scared to pick up the phone. 6 emails? I would have called after 2 max.
 

Latest posts

Back
Top