AMP Research research
- Thread starter Swede
- Start date
r32":1bjheu4h said:
Sorry, not really my field though i did see this the other day.
Any use to you for this ?
http://www.ebay.co.uk/itm/Mavic-Disc-Br ... 487b74f3d5
B3
Senior Retro Guru
Re:
AMP didn't offer XTR on a bike until 1997, prior to that the top bikes were XT.
XT was the parallax design, 95 XTR was the M910 style which looks very similar to the XT Parallax hub, from 96 XTR was the M950 design which will take the AMP disc adapter.
The adapter has an inside diameter of 53.975mm where the hub flange sits, so if the hub you have is smaller than this size it should be OK.
AMP also used to supply thin washers to get the caliper to disc position right.
AMP didn't offer XTR on a bike until 1997, prior to that the top bikes were XT.
XT was the parallax design, 95 XTR was the M910 style which looks very similar to the XT Parallax hub, from 96 XTR was the M950 design which will take the AMP disc adapter.
The adapter has an inside diameter of 53.975mm where the hub flange sits, so if the hub you have is smaller than this size it should be OK.
AMP also used to supply thin washers to get the caliper to disc position right.
In my quest to obtain an AMP F4 BLT fork, I bought a frameset that had the fork as a package deal. So now I am breaking up the package - I am asking US$200 for the frame plus shipping from the US.
Medium size AMP Research B4 in ball burnished finish, should polish up nicely.
No cracks, gouges or dents. Decals mostly in good shape with minor nicks in clear coat.
Based on the bottom bracket serial number, probably a 1997. Weighs 5.5lbs with a headset and bottom bracket.
Headset is a Tange and BB is *probably* a Shimano XT UN-72.
Rear shock is missing one bushing from the eyelet which I can supply in June 2015, after I replace my B5 shock with a Risse.
Medium size AMP Research B4 in ball burnished finish, should polish up nicely.
No cracks, gouges or dents. Decals mostly in good shape with minor nicks in clear coat.
Based on the bottom bracket serial number, probably a 1997. Weighs 5.5lbs with a headset and bottom bracket.
Headset is a Tange and BB is *probably* a Shimano XT UN-72.
Rear shock is missing one bushing from the eyelet which I can supply in June 2015, after I replace my B5 shock with a Risse.
Re:
I'm still looking! Here's another interesting frameset using a B4(?) rear end.
http://www.ebay.co.uk/itm/281848770319? ... EBIDX%3AIT
I'm still looking! Here's another interesting frameset using a B4(?) rear end.
http://www.ebay.co.uk/itm/281848770319? ... EBIDX%3AIT
