heathcliff
Dirt Disciple
Hi don't know if anyone can help . I have finished fitting 8 spd DA to my '85 Merckx . All matching 7400 series drivetrain inc 7402 rear derailleur and down tube shifters, the cassette is a modern 8 spd Sora thing, but I assume it's the same spacing .
If i begin adjusting the indexing from the smallest sprocket up by the time i get to the larger sprockets the tension is too tight and the chain starts to skip. Am i missing something, never had this problem before . The frame is 126mm spaced and am using 130mm DA 8 spd hubs with the mushroomed nut, would this change in spacing throw the derailleur hanger out enough ? It all looks fine to the naked eye .
Any advice welcome !
If i begin adjusting the indexing from the smallest sprocket up by the time i get to the larger sprockets the tension is too tight and the chain starts to skip. Am i missing something, never had this problem before . The frame is 126mm spaced and am using 130mm DA 8 spd hubs with the mushroomed nut, would this change in spacing throw the derailleur hanger out enough ? It all looks fine to the naked eye .
Any advice welcome !