2011 Intense M9 FRO - owned from new and rebuilt

Interesting modification. I'd be very hesitant to trust that 3D-printed adapter, though. What is it made of?
Not sure of the exact material but I'm not concerned as it's only damping forces it's dealing with which, on a fork, are fairly low compared to if it was the spring side. I've had 3D parts made previously which have stood up to some fairly significant forces trying to pull them apart, and certainly far in excess of what this will be dealing with.
 
I remember the elastomer stack from my Quadra 21's firing into my chest under compression when the plastic threads on the topcap just gave up. Hopefully that won't happen to you!
 
I remember the elastomer stack from my Quadra 21's firing into my chest under compression when the plastic threads on the topcap just gave up. Hopefully that won't happen to you!
Ahh, the mighty Quadra with early plastic. Perfection. Thing is, I get the concern, after all it's 'just plastic' but lots of forks have had plastic top caps over the years, even single sided 'modern' ones like the X-Vert Carbon which essentially had similar spring and damping rates to this 888, and not had issues. And that's spring side where the bottom out force with 50lb/in is 350lb, or 180kg (ish). In contrast damper side forces are pretty low even in rebound so it'll be absolutely fine. Bits like this have been fitted to numerous World Cup bikes over the years with zero issues. Even basic PLA has more than enough tensile strength with threads this size.
 
Even as a young man I knew you DH lads were utterly nuts (meant in the highly respected way),, then YouTube confirmed it...
Yeah there is this thing called fear you know, its a normal reaction to rocketing down a hill at high speed ;) 😂

Anyways, what an amazing bit of bike history for a bike that was used as intended asn as much as I prefer non sun bike that was stunning in original colour and even more so with the oh so bright paint 😎

Following with much interest.
And I still think there something wrong with you lot 🤣
 
Back
Top