This was my bike which I got back and sorted.
I picked it up from GA Cycles on 23.7.1994 then sold it as a frame set in '96 to a local fella, then bought it back from him a few years ago, got it powder coated and added all the bits I wanted in '94 but couldn't afford! It's a mixture of pure retro and some slightly newer bits to make it work! It's done 159 miles since being rebuilt...
It's not getting used and I'm going to start racing again so need to swap this one out...
Prices in brackets include proper PayPal and UK Mainland Postage.
(£40) X-Lite Ti Handlebar (decals have pretty much worn off)
(£40) XTR 952 Rear Mech (was NOS but a bit used now)
(£20) PD525 SPD pedals (DX level if I remember right)
SOLD (£220) Wheels - Chris King Universal Disc Hubs - comes with removable 6 bolt adaptors and spacers. I've only used them without adaptors as rim wheelset. Sapim Spokes, Alu Nipples, Mavic XC 717 rims, these were used hubs with new rims and spokes, include Schwalbe Nobby Nic Tyres. Very light hubs!
Video of Rear (without disc adaptor attached) - watch in 720p
https://www.youtube.com/watch?v=16gxcrGCa18
Video of Front (with disc adaptor attached) - watch in 720p
https://www.youtube.com/watch?v=00l08NCIcMc
SOLD (£20) HOPE Stainless QRs
SOLD(£55) Royce Ti BB 115mm
SOLD (£30) Thompson Seatpost
SOLD (£75) '94 19" Kilauea Frame, powder coated with transfers by GillM, should have clear coated over them but didn't get around to it (includes brake guide, X-Lite Ti Seat Bolt and Nokon Brake Cable after brake guide)
SOLD (£50) XTR 960 V-brakes (no play were NOS but a bit used now)
SOLD (£50) XTR M950 8 Speed STI
SOLD (£60) Pace RC45 Stem
SOLD (£30) XTR M900 Cassette & chain (checked with chain checker)
SOLD (£100) Middleburn RS3 (I think) with Middleburn rings and Alu Bolts and X-Lite Alu Crank Bolts
SOLD (£40) Flite Ti Saddle (was a new repro)
SOLD (£20) RINGLE Bottle cage
SOLD SUBJECT TO PAYMENT (£60) Chris King headset
SOLD (£100) Pace RC35 serviced with new crown and long Ahead steerer, new firm elastomers and have a set of unused decals all from Tim at Fork English.
SOLD (£60) Pace RC45 Stem
SOLD (£20) XTR 900 Front Mech
Will be posted signed for (insured for valuable or multiple) and packaged with care.
It's all in good used condition, ready to ride all solid & smooth with no play.
Link to photos -
https://flickr.com/photos/46539696@N08/ ... 3605360565
5 PM's in 3 mins! Please post interest below and PM me, first to confirm purchase will apply.
International buyers should buy and pay for an item, I'll package up for weight and dimensions. Will quote for requested postal/courier at cost and if acceptable, the buyer pays the difference on top of domestic cost, if not I'll refund.
I picked it up from GA Cycles on 23.7.1994 then sold it as a frame set in '96 to a local fella, then bought it back from him a few years ago, got it powder coated and added all the bits I wanted in '94 but couldn't afford! It's a mixture of pure retro and some slightly newer bits to make it work! It's done 159 miles since being rebuilt...
It's not getting used and I'm going to start racing again so need to swap this one out...
Prices in brackets include proper PayPal and UK Mainland Postage.
(£40) X-Lite Ti Handlebar (decals have pretty much worn off)
(£40) XTR 952 Rear Mech (was NOS but a bit used now)
(£20) PD525 SPD pedals (DX level if I remember right)
SOLD (£220) Wheels - Chris King Universal Disc Hubs - comes with removable 6 bolt adaptors and spacers. I've only used them without adaptors as rim wheelset. Sapim Spokes, Alu Nipples, Mavic XC 717 rims, these were used hubs with new rims and spokes, include Schwalbe Nobby Nic Tyres. Very light hubs!
Video of Rear (without disc adaptor attached) - watch in 720p
https://www.youtube.com/watch?v=16gxcrGCa18
Video of Front (with disc adaptor attached) - watch in 720p
https://www.youtube.com/watch?v=00l08NCIcMc
SOLD (£20) HOPE Stainless QRs
SOLD(£55) Royce Ti BB 115mm
SOLD (£30) Thompson Seatpost
SOLD (£75) '94 19" Kilauea Frame, powder coated with transfers by GillM, should have clear coated over them but didn't get around to it (includes brake guide, X-Lite Ti Seat Bolt and Nokon Brake Cable after brake guide)
SOLD (£50) XTR 960 V-brakes (no play were NOS but a bit used now)
SOLD (£50) XTR M950 8 Speed STI
SOLD (£60) Pace RC45 Stem
SOLD (£30) XTR M900 Cassette & chain (checked with chain checker)
SOLD (£100) Middleburn RS3 (I think) with Middleburn rings and Alu Bolts and X-Lite Alu Crank Bolts
SOLD (£40) Flite Ti Saddle (was a new repro)
SOLD (£20) RINGLE Bottle cage
SOLD SUBJECT TO PAYMENT (£60) Chris King headset
SOLD (£100) Pace RC35 serviced with new crown and long Ahead steerer, new firm elastomers and have a set of unused decals all from Tim at Fork English.
SOLD (£60) Pace RC45 Stem
SOLD (£20) XTR 900 Front Mech
Will be posted signed for (insured for valuable or multiple) and packaged with care.
It's all in good used condition, ready to ride all solid & smooth with no play.
Link to photos -
https://flickr.com/photos/46539696@N08/ ... 3605360565
5 PM's in 3 mins! Please post interest below and PM me, first to confirm purchase will apply.
International buyers should buy and pay for an item, I'll package up for weight and dimensions. Will quote for requested postal/courier at cost and if acceptable, the buyer pays the difference on top of domestic cost, if not I'll refund.
