WTD : Race face Turbine cranks inner chainring bolts

[Ti_Tim]

Bit of a long shot this - I've got a Turbine crankset that I want to put an inner chainring onto but I'm really struggling to find the inner bolts and spacers. I don't suppose anyone has a set of 5 kicking around in their spares draw do they ?

Cheers,

Ti_Tim

 

[Last Exit]

I need a set of these too.

Out of stock here http://www.chainreactioncycles.com/Mode ... elID=40499

I will get in touch to see if they can get some more for us

Fred

 

[Ti_Tim]

Fred,

Thanks - they've been out of stock quite a while on CRC - I can't see them getting any more in.

I'll let you know if I eventually find any.

Cheers,

Ti_Tim

 

[Reluctant]

They need long bolts, 12mm? , and spacers about 7mm if i remember right. Try Middleburn for bolts and ID for the spacers, through your local bike shop.

 

[Ti_Tim]

Reluctant - thanks very much it was the size of the spacers I was after to save lots of messing about with trial and error - can anyone else confirm 7mm for the spacers ?

Cheers,

Ti_Tim

 

[Reluctant]

Must search the garage...... on my day off tomorrow....... might have some somewhere from a Turbine i split up last year.

 

[S8-Tom]

I've got RF bolts but no spacers.

 

[Reluctant]

Ti Tim, these are just out of my Turbines. They worked perfectly with my nine speed set up, gap perfectly spaced to discourage the chain getting jammed between rings. Worked well with 8 speed too. Bolts are about 12mm and spacers about 7mm - sorry, ain't got a vernier to hand. Bung us a fiver as paypal gift and i can post on thursday 1st class.

 

[Ti_Tim]

Reluctant - excellent, those look spot on - I've pinged you an IM about the details and I'll put that through on Paypal ASAP.

Many Thanks,

Ti_Tim