WTD: good quality 1" quill mtb stem - with cable guide

[legrandefromage]

What have you got? condition not important but it would be nice to see a Tioga T-bone or similar.

 

[keitht]

I have something Tioga I am sure.

I'll go and check.

 

[Charlieboy28]

silver marin lite thing without top cap which i do have but cant find, could do with the clearcoat removing and a bit of a clean and polish but should come up luvverly

 

[GoldenEraMTB]

I've got a Tioga T-bone 1" quill. What length are you after?

 

[legrandefromage]

need about 110 - 130mm with a bit of rise

 

[GoldenEraMTB]

need about 110 - 130mm with a bit of rise

oh, mine is 150mm with a bit of rise; sorry.


hmmm, might have a ATAC 1" quill with noodle (cable guide), that might fit the bill. I'll check and get back to you later today. It won't be pricey, even shipped from here.

 

[Charlieboy28]

130 with a bit of rise you say voila

gave it a quick rub with a brillo, the clear coat is nearly off and underneath its a nice brushed type effect, it did have oxidation on it though ,so not sure wha t these stems are made of but steel figures in there me thinks, a bit more time and it would come up very nice

just popped a bar end cap in the top, will have a proper rummage for the proper cap but the more i look the more i think it might have been eaten by the lawn mower,

might work as a stop gap, or with a bit of work and the proper cap could be nice, let me know if its of any use

 

[legrandefromage]

cool! might even have a top cap somewhere

 

[Charlieboy28]

call it £3 posted or £4 if you want it slightly quicker, if i post tomorrow it should be there for christmas

 

[Hotgolf]

Think I have a NOS tange prestige T bone here, 150mm here with the 'hole' guide in the middle.
Pic:

Let me know.
Mart