WTD:- Easton Axle (15 x 100mm) For M1 Front Hub

[NS1]

Have sorted a rear axle & endcaps, so now just looking for a 15 x 100m front axle for an Easton M1 hub.

Axle from the Easton M1 hub are found on these wheels :-

- Haven
- Haven Carbon
- EC90 XC
- EA90 XD
- EC70 MTN
- Havoc UST

Has anyone got spare 15mm axle sitting in their spares box or an old set of Easton wheels that may have donor parts??

Below is exaxctly what i'm after.
Thanks.


Easton Front Axle for M1-_12 Hub - 15 x 100mm
Easton Ref. 2033179

 

[johndeverill]

Re:

I was going to suggest SJS but I guess you may have got the pics off there. I also see they have no 142mm axles. Not sure if you need it though as I just converted my 135mm to 142mm just using the end caps. Depends on the M1 type though. OS end cap is like hens teeth so I used the 135mm 12mm end cap and a few 14mm x 1mm shim washers and works fine. Can send a link to the washers I used.

 

[johndeverill]

Re:

https://www.ebay.co.uk/itm/291206133959

 

[johndeverill]

Re:

My hub was an M1-21 if that helps

 

[NS1]

Re: WTD:- Easton Axle + Endcaps (12mm) For M1 Rear Hub

Thanks for the info - my hub is an M1-321 but is essentially the same as your M2-121.
I have some 135 x 12 endcaps that i could use with some spacers to make up the 7mm, but my axle is 135 x 10 QR so I still need another axle that will take a 12mm through axle.

 

[johndeverill]

Re:

Ahhh my M1-21 was 135/QR but you can swap to 12mm/142 on those without changing the axle so I was lucky with that one

 

[NS1]

Rear axle sorted - just need the front 15mm axle now!

Oh & if anyone also has an Easton Havoc 27.5mm (650b) 24 hole rim then I would be very interested!

 

[NS1]

Re:

I'm still looking for the front axle.

 

[NS1]

Re:

Bump

 

[NS1]

Still need the Easton M1 15x100 front axle.