WTD: 74mm Post mount fork to IS mount adaptor +20 (For 203)

[IWish]

As above I NEED a Post mount fork adaptor too IS Caliper mount that's good for a 203 disc. The brakes are good for a 180mm as standard so I need a +20mm.

I have litterally everything else I need for my bike.. It's all built. I've even got new riding gear for it..

I've been riding it with just a rear brake but I need a front too, so I can really push the SingleTrack speed.

This is what I need:

 

[midasdj]

what size post mount? I've got a new Manitou post. 59mm i think to is if that's of use?

 

[IWish]

Hi mate. Thank you for the offer but it's a 74mm I need.. A Manitou is a smaller size. But iirc it's the same through all of the Manitou Post Mount forks.

 

[billinjah]

I'll have a look I might have one. You can shim post mount out for bigger disks if you can find a suitable item.

 

[IWish]

I know I can bodge it but it's getting one to fit. A standard mount on my M4's is a 180mm front to IS so with a Post to IS it's got to be a +20 and makes it 200mm but a 203 disc will be fine.

A picture of what I need is in the first post now.

 

[EarlofBarnet]

I have the Hope mount (second pic) sitting in my shed. Bought it brand new from CRC a few weeks ago, never used it and forgot to send it back. This one: http://www.chainreactioncycles.com/Mode ... elID=13735

Would that do the job?