Having a major clear out . Got to an age now where I realise there is no way I am ever going to need or use all this lot so here goes
.All prices need postage adding. Postal costs at bottom of page
Pair of shimano 105 short drop brakes £10.00
Stems. All Stems are numbered to save confusion .Please refer to the number so you dont end up with something you dont want
1/ 22.2 black aero. 110mm reach £7.00
2/ Silver 90 degree 100mm reach Very tidy allmost as new £15.00
3/ marked kf100 with 100mm reach £8.00
4/Tange 90 degree 90mm reach beautiful condition £15.00
5/ itm 100mm reach £13.00
Shimano 600 front small flange hub. Smooth bearings £12.00
SR fluted seat post 27.2 Showing it age with marks £12.00
Shimano 600 aero post, 27.2.Very tidy and getting rare £24.00
Pair of campag crank covers £20.00
Three normandy large flange hubs, All 36hole 2 with the narrow axles . I has nuts the other has wing nuts.The third has had the spindle changed and will take a qr
£8.00 each
Pair of shimano BL-R550 flat bar brake levers FOR CANTIS . Not v brakes.Fit 22.2 bars As new. £12.00
FD4403 Triple front mech 9 speed Bolt on £12.00
Tiagra FD4603 bolt on £10.00
Rather nice vintage suntour ARX with clamp. Clamp is 27.8mm fully closed £10.00
DNP silver freewheel 7 speed 13/24 £12.00
Pair of 32 hole mavic hubs.Super smooth bearings £25.00
Pair of strong wheels.Mavic ma40 on deore ix hubs 36/36 with stainless spokes .Smooth bearings and run straight.Has had a
very small bruise on non driveside rear but cannot be felt on braking. Bought them for use on a gravel bike but never fitted .After buying them parted another bike and ended up with a near new set of spare wheels so no longer needed £45.00
Forks. Please read this carefully.
These are vintage raleigh as far as I can tell.The threads are 26tpi not the usuall 24 tpi. The fork race mount is26.9 mm .They take nutted brakes but that can be easily changed.Dropouts standard 100mm. Under crown to spindle measures 37cm Steerer is 193mm with 30mm of thread. Chromework in excellent condition.Need repainting .Tubes feel quality with a nice ring when tapped.Fork crown is nervex professional so they were not built for a cheap knockabout. Please ensure they will do the job before buying £18.00
Postage to add
Campag covers £2.00
Wheels please contact. However box too large for evri so probably parcel force around £12 to £14
Fork £6.00 evri
All the rest £4.50
Everything will be posted as quickly as possible'
Any questions then please ask
Thanks for reading
Regards
Peter
.All prices need postage adding. Postal costs at bottom of page
Pair of shimano 105 short drop brakes £10.00
Stems. All Stems are numbered to save confusion .Please refer to the number so you dont end up with something you dont want
1/ 22.2 black aero. 110mm reach £7.00
2/ Silver 90 degree 100mm reach Very tidy allmost as new £15.00
3/ marked kf100 with 100mm reach £8.00
4/Tange 90 degree 90mm reach beautiful condition £15.00
5/ itm 100mm reach £13.00
Shimano 600 front small flange hub. Smooth bearings £12.00
SR fluted seat post 27.2 Showing it age with marks £12.00
Shimano 600 aero post, 27.2.Very tidy and getting rare £24.00
Pair of campag crank covers £20.00
Three normandy large flange hubs, All 36hole 2 with the narrow axles . I has nuts the other has wing nuts.The third has had the spindle changed and will take a qr
£8.00 each
Pair of shimano BL-R550 flat bar brake levers FOR CANTIS . Not v brakes.Fit 22.2 bars As new. £12.00
FD4403 Triple front mech 9 speed Bolt on £12.00
Tiagra FD4603 bolt on £10.00
Rather nice vintage suntour ARX with clamp. Clamp is 27.8mm fully closed £10.00
DNP silver freewheel 7 speed 13/24 £12.00
Pair of 32 hole mavic hubs.Super smooth bearings £25.00
Pair of strong wheels.Mavic ma40 on deore ix hubs 36/36 with stainless spokes .Smooth bearings and run straight.Has had a
very small bruise on non driveside rear but cannot be felt on braking. Bought them for use on a gravel bike but never fitted .After buying them parted another bike and ended up with a near new set of spare wheels so no longer needed £45.00
Forks. Please read this carefully.
These are vintage raleigh as far as I can tell.The threads are 26tpi not the usuall 24 tpi. The fork race mount is26.9 mm .They take nutted brakes but that can be easily changed.Dropouts standard 100mm. Under crown to spindle measures 37cm Steerer is 193mm with 30mm of thread. Chromework in excellent condition.Need repainting .Tubes feel quality with a nice ring when tapped.Fork crown is nervex professional so they were not built for a cheap knockabout. Please ensure they will do the job before buying £18.00
Postage to add
Campag covers £2.00
Wheels please contact. However box too large for evri so probably parcel force around £12 to £14
Fork £6.00 evri
All the rest £4.50
Everything will be posted as quickly as possible'
Any questions then please ask
Thanks for reading
Regards
Peter
