Stewartsteel
Old School Hero
Full or part groupset wanted
Wanted Wanted Campagnolo Nuovo record Groupset
- Thread starter Stewartsteel
- Start date
Walterscot
Retro Guru
What condition of groupset are you looking for? If you can wait until Tuesday I can send you some photos of the groupset I have.
Stewartsteel
Old School Hero
I want good working conditions and price please thanks
Walterscot
Retro Guru
Here’s a selection of the Nuovo Record components I have. I have multiples of most parts so you can mix and match for what you need i.e. band-on or braze-on shifters, nutted or recessed caliper bolts etc.
If you want to save some money then I’ll sell the stuff than needs a clean for less. And if you buy multiple components I’ll do you a better deal too.
Cleaned and polished 82 Nuovo Record mech or a pre-cleaned early-70s mech
These are just a couple of the shifters I have in various states of cleanliness and age.
Slotted or un-slotted front mech. Un-slotted one has the cable stop built into the mech.
Nutted or recessed brakes. Both with original brake blocks. More to follow in next post…
If you want to save some money then I’ll sell the stuff than needs a clean for less. And if you buy multiple components I’ll do you a better deal too.
Cleaned and polished 82 Nuovo Record mech or a pre-cleaned early-70s mech
These are just a couple of the shifters I have in various states of cleanliness and age.
Slotted or un-slotted front mech. Un-slotted one has the cable stop built into the mech.
Nutted or recessed brakes. Both with original brake blocks. More to follow in next post…
Walterscot
Retro Guru
I don’t have any Nuovo Record brake levers other than these ones which are part of a boxed NOS set.
I do have a couple of pairs of Super Record (drilled) levers and a pair of Gran Sport levers that need a little sanding and polishing so would do them for pretty cheap.
Let me know what you think and I can give you a price for individual bits and multiple bits
I do have a couple of pairs of Super Record (drilled) levers and a pair of Gran Sport levers that need a little sanding and polishing so would do them for pretty cheap.
Let me know what you think and I can give you a price for individual bits and multiple bits
Walterscot
Retro Guru
Super Record levers with NOS hoods
Cranks in 170mm. Fluted and non-fluted.
Cranks in 170mm. Fluted and non-fluted.
Stewartsteel
Old School Hero
I want nutted brakes
The slotted front derailleur
The uncleared rear derailleur
The top centre crank
Need bottom bracket
Interested in the rough brake levers
Thanks
The slotted front derailleur
The uncleared rear derailleur
The top centre crank
Need bottom bracket
Interested in the rough brake levers
Thanks
Walterscot
Retro Guru
nutted brakes
slotted front derailleur
uncleaned rear derailleur
top centre crank
rough brake levers
Everything for £180 posted anywhere in the UK.
If you let me know whether it’s an English or Italian thread BB you need then I’ll chuck one in for free.
Stewartsteel
Old School Hero
Need Italian bottom bracket with bolts and washers
Also looking. For clincher wheels and bars and stem thanks
Also looking. For clincher wheels and bars and stem thanks
