Viking Ian Steel

Stiff_Orange

Old School Hero
Had this bike since I was a teenager and it was 25-30 years old then. It was resprayed/restored in the 1980's, then I stopped using it after Uni.
It's been hanging around dismantled for about 25 years, but after restoring several Retro MTB's. I thought it was time to get a classic steel bike back on the road again.

Viking may not be a popular brand in the Retrobike world. (Probably because to the shite produced nowadays under the Viking name) and the Ian Steel definitely wasn't their top end frame, but it's a personal thing.
Paintwork isn't my best work, but it's not turned out too bad. Next step is to lacquer it.
 

Attachments

  • 103539774_10217295753898263_5048425567310616178_n.jpg
    103539774_10217295753898263_5048425567310616178_n.jpg
    37.7 KB · Views: 819
  • 103256447_10217295753618256_849299884876230214_n.jpg
    103256447_10217295753618256_849299884876230214_n.jpg
    20.6 KB · Views: 822
  • 104166698_10217295753338249_4596739761888684583_n.jpg
    104166698_10217295753338249_4596739761888684583_n.jpg
    65.5 KB · Views: 823
Nice :). Older viking bikes like the mile-eater were classy. By the time I entered the bike world mid 70's their cachet was waning somewhat....
 
That's looking really good. I look forward to seeing progress. Yes midlife, the Mileater is classy (well I would say that wouldn't I?) not forgetting the Severn Valley which was a proven race winner. And the Ian Steel was no slouch either, 531 main tubes after all. And one model in the 1955 range came equipped with sprints and tubs and 10 speeds!
 
Re: Viking Ian Steel - Completed .. almost

A few minor issues. The drive side BB would not screw in cleanly, thankfully a LBS was able to chase it out. Then when fitting the front brake I discovered the front brake was twisted and i snapped it trying to straighten it. (replacement caliper for parts found on ebay)

I'm quite pleased with how it turned out, paint is hopeless, but OK from a distance. Still a bit of tidying such as truing the rear wheel, trimming the brake cable outers so the loops match and removing the logo from the cheap modern seatpost.
 

Attachments

  • side.jpg
    side.jpg
    299.9 KB · Views: 468
  • crank.jpg
    crank.jpg
    285.4 KB · Views: 467
  • front.jpg
    front.jpg
    212.1 KB · Views: 465
Back
Top