Types of bearing removal tools

[dan28]

What kind of tool is needed to remove these bearings
I was looking at the type that have two hooks but I don't think it will fit as the bearing is small

 

[dan28]

I ve tried heating it an knocking it out with a copper drift but it's in there tight so it's time to.buy a tool

 

[jonnyboy666]

looks a bit of a strange one, a pivot bearimng tool is what you need but it looks really deep so even with a proper tool you may have to cobble something together because of the depth. i have the Enduro bearing pivot tools which i do think are very good and you get more for your money with that kit compared to the Park Tool kit. that said i think you'd need an extention tube for the bearing to slide in to as it comes out but that would also mean a longer bolt to accomodate the tube.

this is the one i have, you can buy the individual sized pullers though, then just use a long nit and bolt to save you buying the press

https://www.endurobearingsonline.com/products/modular-bearing-multi-press-brt-050

 

[dan28]

a plan is coming together
i m thinking steel tube an washer that fits over the bearing
threaded bar through the washer an a nut on each end an tighten it
but it needs something that will go through the bearing an expand an suggestions?
i m thinking maybe a ground anchor

 

[rc300]

What kind of tool is needed to remove these bearings
I was looking at the type that have two hooks but I don't think it will fit as the bearing is small

That a needle roller bearing?

 

[dan28]

Yes needle roller
It's in gt ruckus 1.0 similar to gt dhi
There is a bearing either end of the tube so you need to go through the hole in the bearing to access it

 

[rc300]

I've had em out with my blind bearing puller

 

[dan28]

Do you have a link for the tool you used

 

[rc300]

I got one of these and does the job


https://www.amazon.co.uk/YUAN-Beari...-1-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9hdGY&psc=1

 

[Twozaskars]

I got one of these and does the job


https://www.amazon.co.uk/YUAN-Beari...-1-spons&sp_csd=d2lkZ2V0TmFtZT1zcF9hdGY&psc=1

What he said, very useful tool.