SlackAlice
Dirt Disciple
- Feedback
- View
I think they just happen to us all at some point in time. I had exactly the same as you on Sunday. Small flint cut into the shoulder of the rear tyre and despite rolling, leaving and pumping it back up, in the end I popped a tube in and found there was no sealant left in the tyre!
Either I didn't put enough in when I fitted the tyres (about 1.5 scoops of Stans for a 2.1 High Roller), or it just couldn't seal the small cut, or maybe I got more than one.
I don't have any of those worms, so I'm going to glue a rubber patch to the inside of the tyre, reckoning that the tear is small enough to not allow the patch to bulge through.
Ive got a Panaracer tubeless repair kit, Weldtite naturally do one and the worms are available from all good bike and car stores and ebay!
Either I didn't put enough in when I fitted the tyres (about 1.5 scoops of Stans for a 2.1 High Roller), or it just couldn't seal the small cut, or maybe I got more than one.
I don't have any of those worms, so I'm going to glue a rubber patch to the inside of the tyre, reckoning that the tear is small enough to not allow the patch to bulge through.
Ive got a Panaracer tubeless repair kit, Weldtite naturally do one and the worms are available from all good bike and car stores and ebay!