The Genesis Equil Brum Brum Project

You just need this now :LOL:

https://gearbrisbane.com/products/supacaz-ssk-handlebar-tape-bling-brass
5ad0b071fc19a4715609e4b0e000a100_900x.jpg
 
Hey! Sweet build, these are great frames, I’ve had both the rim and disc models in 725 and they ride superbly.

Glad you’re alive after the hit, how did the insurance thing go?

Also, what kind of lower headset bearing did you need to fit that WCS fork with the tapered crown seat?

Oh and if you don’t like the hanger extender, try it without and wind in the mech’s B-screw… I run 11-34 and 11-36 cassettes all the time even on regular short cage mechs this way and am yet to have a problem, my current Equilibrium is 11-36 cassette and RD 6800 short cage. No guarantees with your mech etc but worth a try.

Happy riding ✌️
 
Last edited:
Hey! Sweet build, these are great frames, I’ve had both the rim and disc models in 725 and they ride superbly.

Glad you’re alive after the hit, how did the insurance thing go?

Also, what kind of lower headset bearing did you need to fit that WCS fork with the tapered crown seat?

Oh and if you don’t like the hanger extender, try it without and wind in the mech’s B-screw… I run 11-34 and 11-36 cassettes all the time even on regular short cage mechs this way and am yet to have a problem, my current Equilibrium is 11-36 cassette and RD 6800 short cage. No guarantees with your mech etc but worth a try.

Happy riding ✌️

Hi thanks yes its getting there.

Insurance is still in progress it takes ages sadly.
The fork can take a normal 45degree cartridge bearing so the hope one that came with the headset works fine.

I tryied the b screw thing with the ultegra 6600 it worked pretty well with an added nut for some extra tension with a 32t cassette but it wouldnt have it with a 34t so i got that chome mircoshift mech and that works spot on.
 
Ah cool, it’s worth it for the extra low gears either way I think.

Hope you get there soon with the insurance! Do you have anyone helping you?

I got hit by a car too and am also going through it, at a bit of a stalemate as the drivers insurance is stating absolutely that it’s a 50/50 fault so will pay 50% of the damages, whereas I would honestly say it’s more like 80% the fault of the driver but they just won’t accept anything other than 50/50. It’s a pain, hope yours is going smoothly even if slowly.
 
Latest update on the Genesis is just been enjoying it mosty and fitted some slighly heavier but more powerful TRP magnesium calipers with ti fixings the planet x's wernt quite powerful enough with my weight plus backpack on. I swapped the kools stop salmon pads into them as the pads they cam with were new.

Not as classic looking as the planet x but more racey looking. Also gained a load more tyre clearance so could go back to a 32c if i wanted to now.

DSC_3273.JPG DSC_4043.JPG DSC_4044.JPG DSC_4047.JPG DSC_4048.JPG DSC_4049.JPG DSC_4054.JPG DSC_4055.JPG
 
A few more upgrades on the equil brum brum. I wanted a more classic looking chainset so went for a stronglight compact then suped up the setup with

T.A polished rings
Aluminium ring bolts
Raceface Titanium bb
Titianium crank bolts

Also stuck some ti jocky wheel bolts on lol

Chainset factory
DSC_3198.JPG

new rings and bolt differance

DSC_3227.JPG
DSC_0176.JPG


DSC_0175.JPG

built up

DSC_0177.JPG

Raceface ti bb

DSC_3197.JPG

Ti bolts

DSC_0191.JPG

jocky wheel bolt differance lol

DSC_0193.JPG

DSC_0194.JPG
 

Latest posts

Back
Top