ProsperousOne
Dirt Disciple
Whats an average or good frame weight for a decent steel frame ? I've no experience in retro steellees
Steel frame weights
- Thread starter ProsperousOne
- Start date
onegoodbike
Merlin Fan
- Feedback
- View
edited as road bike frameset weights probably don't matter in a post in the mtb section! 
sorry.
sorry.
Last edited:
- Feedback
- View
Look at the bottom of the forum pop in to Weenies.
But for 19/20".
4.5lb to 4.75lb is a good light weight frame with high quality tubing. Likely turn of the 90s or later 90s
93 ish to mid 90s then you can get to a tad over 4lb
after the drop the weight aim and before they beefed them up again.
Smaller sizes of course reduce the weight.
By a considerable amount! 17.5 to 20.5 " marin frames run 400g + heavier frame and forks.
Even their 750g rockstar forks are only 750g at 15"
. 20.5" set is cruising towards 900g
fearfactoryüberalles
Senior Retro Guru
- Feedback
- View
Up to 19" size, weight around 2 kg or less is a good sign of at least double butted quality tubes. Late 90's saw the mass market of stupidly light (and possibly fragile too) frames, built from e.g. Columbus, Dedacciai, Fuji, Ritchey WCS/Nitanium (custom modified Tange), Tange Ultimate Superlight material. Then came new regulations, longer susp. forks, etc, so the the frames had to be bulkier. Frame wall thickness went as low as 0.5/0.8 mm, so a heavier curse word would have dented them easily 
.
I tend to buy team or top-notch frames only as they should remain desirable in the long run anyway. And what's the point having meh stuff whan life's too short?!
I had a C. Foco steel frame (unknown brand) in 18" at 1600 gr. weight made for V-brakes - for a 100 kg man (yours truly) it was certainly questionable to ride it properly, so I sold it unbuilt to a member here. My Breezer Lightning comes at 1700 gr in 18.5" and I guess it has nice weight/sturdiness ratio, if a bit still too easy to dent.
.I tend to buy team or top-notch frames only as they should remain desirable in the long run anyway. And what's the point having meh stuff whan life's too short?!
I had a C. Foco steel frame (unknown brand) in 18" at 1600 gr. weight made for V-brakes - for a 100 kg man (yours truly) it was certainly questionable to ride it properly, so I sold it unbuilt to a member here. My Breezer Lightning comes at 1700 gr in 18.5" and I guess it has nice weight/sturdiness ratio, if a bit still too easy to dent.
