Raleigh Randonneur 708 1997

Thanks for that. I've been giving it a gentle service and I can't believe how fresh it is. There don't seem to be any issues and I think it's all original. One small scratch on the chainstay and a slightly peeling 'Randonneur' decal. Any ideas on how to match the paint?
It rides quite beautifully too. Happy cyclist here
I keep a few tins of Humbrol model paint in the shed. Even if there's not an exact match for a bike it's usually quite easy to mix a suitable colour.
 
I ordered three little pots of Humbrol paint that looks to be quite close matches, plus some clear varnish. Also some 'decal fixer'. Wish me luck!

Also just spotted that the wonderfully useable bar-end shifters can be switched from SIS to friction shifting. I prefer friction shifting so this is great news.
 
It's true!
Index is great if it's got the correct components and clean cables.
A lot of Frictionistas base their experience on mismatched and tired components - which Definitely work better on friction🤣

Also the more speeds you have, the fiddlier the friction becomes.

Its ok if you've got a few spare minutes to trim every shift😉

Me? I'm in a hurry.
My journey is important!
Click click click
I have fish to fry😄
 
Re:

cont....

A few parts I’m really digging:

Microshift rear mech was peanuts and is light, discrete and well built -- it’s big brother Sun XCD was planned, but as the peerless Disraeligears put it - “[the xcd] has little to distinguish it from its, less-storied, microSHIFT bretheren except its sheer silveriness.” disraeli


Jack Brown tyres: these are a Grant Pederson [Rivbike] design knocked out by Panaracer and available here through Planet X. At 33.33333mm they are cushy even on wide mavic t-261 rims, and although I was sceptical about puncture resistance, they’ve somehow survived the dreaded hedge trimming [by which I mean industrial decimation with those massive flails that spew thorns far and wide] season. They also performed brilliantly in a massive downpour that I got caught in on my first audax.


View attachment 472583


“Mashup” brake levers. I’ve had a few builds with drop levers and cantis, and while there are some good performing levers, they are usually too modern or aero. So initially I opted for dia compe Gran Compe 202s which look great, are non-aero and have groovy adjusters. But once fitted they were just a bit too flimsy and squishy - not as positive as some old Shimno 105s I’d used on an MTB drop bar build a few years ago (SLR cable pull and sprung levers). So I dug out the 105s cleaned off the logos, transferred the hoods and adjusters from the Gran Compes and voila: well sprung, nicely modulated and powerful when hooked up to proper wide-profile Tektro cr720s.


View attachment 472584


Ride.

The more I ride this the better I like it. Its the balance between practicality and agility that stands out. The frame is comfy and responsive. It’s stiff enough not to feel noodly under power, and light enough to build into a quick bike that doesn’t hate hills. The steering is quick too. This is accentuated by the short stem and relatively narrow flared bar set up I have, and I considered using a wider Nitto Randonneur bar. But I love the BB1s and will just man up. It’s rock solid down hill too. Apart from an eventual upgrade to a dynamo hub wheelset, the only changes I’m considering are moving the shifters from the down tube to the stem steerer. This grieves me somewhat, but I have to acknowledger that on long rides I’m getting an old-man-ache-on-one-side from reaching down. Perhaps Yoga is the answer ….


View attachment 472585


View attachment 472586

It would be great to build some more detail on these bikes, and in researching this I came across a snippett again from a Hilary Stone advert that mentions the build process:


[the 708 frames] were very carefully designed and very well built in Raleigh’s Special Products Division. We followed the building of one of these frames in Cycling Plus Issue 40 and there was a test of the complete bike C+36. I was very impressed – because the photography meant that the brazing torches were on for longer, they cut the frame up at the end as they thought the tubing might have been overheated… That was the sort of level of care Raleigh SPD took with their frames…

Let me know if you have a copy of Cycling Plus issues 36 and/or 40 [I think from 1995] I’ll pay good gold.

View attachment 472587
 
Hi Guinness, I've come to love the friction shifters on my Raleigh Rapide, so it really works for me on the Randonneur.

So exciting discovery...I ordered three different Humbrol paints to touch up a couple of minor chips on my frame (hoping a mix of them might come close). Well one is an absolutely perfect match for the 'Avio Blue' of the Randonneur. It's the 'No 52 Baltic Blue - Metallic - Tinlet No 1 (14ml). AA0566. Even the level of iridescence is perfect. Yours for Humbrol for the princely sum of £2.69!

May post pics if I get round to it. 👍😁
 
Hi Guinness, I've come to love the friction shifters on my Raleigh Rapide, so it really works for me on the Randonneur.

So exciting discovery...I ordered three different Humbrol paints to touch up a couple of minor chips on my frame (hoping a mix of them might come close). Well one is an absolutely perfect match for the 'Avio Blue' of the Randonneur. It's the 'No 52 Baltic Blue - Metallic - Tinlet No 1 (14ml). AA0566. Even the level of iridescence is perfect. Yours for Humbrol for the princely sum of £2.69!

May post pics if I get round to it. 👍😁
Just bought a 1996 Randonneur. Needs a small touch up on chain stay. Thanks for the info re the paint. Every day a learning day here!
 
Been meaning to post some details of my recent Raleigh Randonneur build.

View attachment 472574


The idea was to build something to use for audax rides and commuting. I’d had a Randonneur frame a few years ago, but it was a bit long in the TT [long legs short body syndrome].

The old one:

View attachment 472575


What that build did show me was how good the frames are. The 708 tubes are heat-treated mang mol like 753, but with a larger diameter top tube and ‘special section’ internal bracing to increase strength [8 internal flat sections according to wikipedia].

View attachment 472576



Here’s a bit of background:

Raleigh’s Randonneur production was born out of the demise of the SBDU works and subsequent birth of the Special Products Division around 1987. According to cycling historian Tony Hadland:

The demise of the European team in the early 1980s led to the closure of Ilkeston but resulted in Gerald O’Donovan and Melvyn Cresswell teaming up on product development at what became known as Special Products Division. Shortly before this, and supported by his ‘indulgent boss’ Yvonne Rix, Cresswell had designed and launched the Randonneur tourer. It was based on personal experience and inspired by his first ‘serious’ bicycle, which Gerald O’Donovan had built for him many years previously. Although Raleigh’s most expensive complete bicycle, it was an instant success. The Randonneur proved that Raleigh could still sell high-end product if it was thoughtfully designed and manufactured.

Hadland Link

There isn’t much certainty about the various incarnations of Randonneur from the late 80’s to the close of RSP in 2000. As far as I can make out earlier ones are made of 531 ST, later ones of 708. Hilary Stone employed a useful breakdown in recent advert for one of his:

… the second series Raleigh Randonneur frames [were] built from Reynolds 531ST tubing. The first series did not have cantilever brakes and the third series were built from from Reynolds 708 tubing with a 1 1/8in diameter top tube.

708 was available in Classic or Touristique flavours. I’ve no evidence what the difference was: logic suggests that like 531ST, Touristique was somehow a stouter more touring version; anyone know more?

It’s worth noting that 708 frames were available as full bikes badged Randonneurs, and also frame-only with custom options, badged as Gran Tour.

View attachment 472577

Towards the end of production, Randonneurs were spiffed up with top level components including hydraulic rim brakes (thanks to one-eyed_jim for the link posted on one of the other threads).

View attachment 472578


link to full size pic

For me, it it’s the 708 versions that epitomise the marque: innovative materials worked into a great design with brilliant signature touches that add a bit of iconic cool: oversize seat stay caps, spoke holders on the left stay (531 frames were on the right, 708, left); no chainstay brace, but instead a cool "pip" for mudguards; 135mm rear end.

View attachment 472579

Mine is an H serial number which likely equates to 1997. serial no. linky But I’m not wedded to catalogue correctness and it’s been built with a, er, retro flavour: Specialized BB1 flared drops held high on a nitto stem; non aero brake levers, Swift Ti saddle and 9sp Dura ace shifters on the down low; MKS flats with clips and straps. Wheels are stock, and while the black parallax hubs don’t really fit, they can stay until they wear out or I splash on a dynamo hub.


View attachment 472580

View attachment 472582

oops, pic limit reached ....
This SBDU number bike sold a few weeks ago, what a great buy, could this be the Randonneur template for the production bikes 🤔

https://www.ebay.co.uk/itm/29665500...iIhcVWxQfO&var=&widget_ver=artemis&media=COPY

Screenshot_20241030-095459.png
 
When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Interesting (and a bargain if your legs are long enough). Different to the official touring models for 89. It looks to have signature caps but no spoke holders. Did they offer touring frame sets then? The catalogue shows roady ones but not tourers.
 

Latest posts

Back
Top