PD M737 Help Required.

[Iwasgoodonce]

Does anyone have a scan of the exploded parts sheet of the above? I don't think the standard re-grease is going to be adequate this time! What size are the bearings other than size extra tiny? I have done this before but that was a long time ago! Anyone have more recent experience?

Thanks in advance...

 

[Max P]

I remember the very first time I tried to undo mine to regrease them that silly plastic bit stripped...

I ended up drilling a 1.5mm hole in the outer part and simply squirting in grease every few months (a la 'Greaseguard') - the old grease came out the other side by the spindle thread.

(you can see the hole in the last but one pic in my Orange below)

 

[stephenwalker78]

when you find out what size...

Can you post it on here? I have a pair in my toolbox, and most of the bearings are less than spherical.

Nice job on the polishing on the clockwork!

 

[Carsten]

doublepost

 

[Carsten]

Does anyone have a scan of the exploded parts sheet of the above? I don't think the standard re-grease is going to be adequate this time! What size are the bearings other than size extra tiny? I have done this before but that was a long time ago! Anyone have more recent experience?

Thanks in advance...

bearing balls are 3/32" and you need 60 per pedal

that's the exploded view of the m747 pedal but the m737 is just the same. i have the exploded view in front of me, just too lazy to scan it in.

carsten

 

[Max P]

 

[Iwasgoodonce]

Thanks people. Cheers Carsten. I have got it back together again. I got them second hand in 1991 I think. If only all parts lasted that well.