Paul Components MiniMoto brake calipers (pair)

cc17

Retro Guru
The MiniMoto is mini-v brake for use with standard short pull brake levers.Like Motolite and Moto BMX brakes, the MiniMoto is a direct pull cantilever brake. This design is simpler to install than a traditional cantilever brake, and gives the MiniMoto a narrow profile.
Arms of the MiniMoto have been shortened to match the leverage of standard road brake levers, making the MiniMoto compatible with drop bar brake levers with integrated shifters.The short curved arms give plenty of clearance for cyclocross tires or wide fenders. The spring tension is independently adjustable for each arm which means the brake can be precisely centered on the wheel and adjusted for return strength.Narrow Koolstop brake pads with threaded posts are included with the MiniMoto. These all-weather brake pads have spherical washers for pad angle adjustment, and mount to a slot for vertical alignment with the rim.
With a simple pivoting quick release on one arm, it’s easy to open the brake to remove a wheel. The cable enters the brake through a barrel adjuster at the top of the curved cable noodle. This adjuster makes it quick and painless to fine-tune the cable tension of the brake without tools.
The brakes are in immaculate condition having seen very little use.

£98 for the pair
 

Attachments

  • PC Front 2.jpg
    PC Front 2.jpg
    52.9 KB · Views: 271
  • PC Front.jpg
    PC Front.jpg
    45.5 KB · Views: 271
  • PC Rear.jpg
    PC Rear.jpg
    39.7 KB · Views: 271
  • RC Rear 2.jpg
    RC Rear 2.jpg
    46.1 KB · Views: 271

Latest posts

Back
Top