As soon as I bought this, another project came along, so this has to move on.
19" (c-t) Prestige from 1993 in very bright orange.
Paint is pretty good all around, some sun fade to top tube which I've tried to picture, most noticeably this is where the cables have created a 'shadow', so when cabled-up will be less noticeable.
No dents etc, no chainsuck, no tyre rub. Few small chips here and there. Worst part is possibly where I guess the seat clamp has been slightly over tightened in the past, the paint has cracked off and there's some surface rust. No cracks in the tube itself.
Very slight impression from the front mech band which I would describe as a slight crimp to the tube.
The decals are mostly there, and I wouldn't re sticker, I'd live with the originals or maybe add some strategic bits of tape!
I'll remove the headset cups, and take the rest of the sticky shark fin residue off before I hand over.
I disassembled and all the threads were ok.
No fork.
I would have a 'Stalk' stem and HotRod bars (cut) for a little extra if the buyer wanted.
I think this takes a 27mm seatpost and 28.6 front mech.
£110 posted (UK) or £85 picked up Bournemouth, ppg, for this light frame.
19" (c-t) Prestige from 1993 in very bright orange.
Paint is pretty good all around, some sun fade to top tube which I've tried to picture, most noticeably this is where the cables have created a 'shadow', so when cabled-up will be less noticeable.
No dents etc, no chainsuck, no tyre rub. Few small chips here and there. Worst part is possibly where I guess the seat clamp has been slightly over tightened in the past, the paint has cracked off and there's some surface rust. No cracks in the tube itself.
Very slight impression from the front mech band which I would describe as a slight crimp to the tube.
The decals are mostly there, and I wouldn't re sticker, I'd live with the originals or maybe add some strategic bits of tape!
I'll remove the headset cups, and take the rest of the sticky shark fin residue off before I hand over.
I disassembled and all the threads were ok.
No fork.
I would have a 'Stalk' stem and HotRod bars (cut) for a little extra if the buyer wanted.
I think this takes a 27mm seatpost and 28.6 front mech.
£110 posted (UK) or £85 picked up Bournemouth, ppg, for this light frame.
