Items for sale:
[£125 posted] Shimano XTR M985 crank set, good condition. It is fitted with a 32T pass quest chainring for 1x setup and comes with a new spare too.
[£170 posted] SRAM XX shifters and mechs. All in decent condition. For 2x10spd. Rear mech takes up to 36T cassette and front mech is direct mount and was removed from a Cannondale. All parts weigh just over 500g and have carbon parts and some Ti bolts.
[£18 posted] Cannondale Hollowgram Spider SRAM XX 2x10 Mountain 80x120 BCD Silver KP128, 60g.
[£250 posted] Mavic Crossmax SLR 26" Lefty 1.0 Wheelset With Avid XX rotors. Wheels are in good condition. They do have some marks to spokes as you'd expect and nipples are not seized or corroded in place.
Front hub is for lefty 1.0 forks aka 50mm wide but can be used on 2.0 hubs with an adapter kit.
Rear is 135mm QR.
They run true and Freehub not worn at all.
Wheels come with 160mm up front and 140mm rear. Both are avid XX. There is one seized rotor bolt on the rear wheel but all other 11 bolts recently replaced.
Front and rear bearings replaced in June 2024.
Tyres are included which are racing Ralph 26x2.25" and set up with TPU tubes.The rear rim has a small dink and no longer seals when ran tubeless. TPU tubes work great though.
[£275 posted] Cannondale Flash, Carbon 29er Large With Lefty PBR fork. The frame is from 2013 and is the Himod version.
Total weight of the frame set with fork and stem is 2.9kg.
I had this set up as a sub 9kg hardtail and it rides well.
Frame is in sound condition. The two rivnuts on the seat tube came loose so I removed them and added to brackets for fitting a bottle cage to instead.
Frame is large 19 inch. I am 5'11 and the frame was a great size for me.
Headset bearings included but are heavily used and inexpensive to replace. I used an XTR crank on this hence why it has the Rotor 30mm to 24mm bottom bracket instead of BB30.
I did put some heli tape on both the frame and fork. The frame has some chain suck marks on the dropout. Inspect photos for condition. No cracks.
The OPI stem is included and is 110mm in length.
I sent the lefty fork to Race Ready Suspension in Kendall 2 weeks ago but they said the fork was not worth servicing. The fork still functions and holds air. The lockout works. The synopsis was that the fork needed new bearings, filter and seals but due to how much milage the fork has, replacing those bits would not be worth while.
Photos:
[£125 posted] Shimano XTR M985 crank set, good condition. It is fitted with a 32T pass quest chainring for 1x setup and comes with a new spare too.
[£170 posted] SRAM XX shifters and mechs. All in decent condition. For 2x10spd. Rear mech takes up to 36T cassette and front mech is direct mount and was removed from a Cannondale. All parts weigh just over 500g and have carbon parts and some Ti bolts.
[£18 posted] Cannondale Hollowgram Spider SRAM XX 2x10 Mountain 80x120 BCD Silver KP128, 60g.
[£250 posted] Mavic Crossmax SLR 26" Lefty 1.0 Wheelset With Avid XX rotors. Wheels are in good condition. They do have some marks to spokes as you'd expect and nipples are not seized or corroded in place.
Front hub is for lefty 1.0 forks aka 50mm wide but can be used on 2.0 hubs with an adapter kit.
Rear is 135mm QR.
They run true and Freehub not worn at all.
Wheels come with 160mm up front and 140mm rear. Both are avid XX. There is one seized rotor bolt on the rear wheel but all other 11 bolts recently replaced.
Front and rear bearings replaced in June 2024.
Tyres are included which are racing Ralph 26x2.25" and set up with TPU tubes.The rear rim has a small dink and no longer seals when ran tubeless. TPU tubes work great though.
[£275 posted] Cannondale Flash, Carbon 29er Large With Lefty PBR fork. The frame is from 2013 and is the Himod version.
Total weight of the frame set with fork and stem is 2.9kg.
I had this set up as a sub 9kg hardtail and it rides well.
Frame is in sound condition. The two rivnuts on the seat tube came loose so I removed them and added to brackets for fitting a bottle cage to instead.
Frame is large 19 inch. I am 5'11 and the frame was a great size for me.
Headset bearings included but are heavily used and inexpensive to replace. I used an XTR crank on this hence why it has the Rotor 30mm to 24mm bottom bracket instead of BB30.
I did put some heli tape on both the frame and fork. The frame has some chain suck marks on the dropout. Inspect photos for condition. No cracks.
The OPI stem is included and is 110mm in length.
I sent the lefty fork to Race Ready Suspension in Kendall 2 weeks ago but they said the fork was not worth servicing. The fork still functions and holds air. The lockout works. The synopsis was that the fork needed new bearings, filter and seals but due to how much milage the fork has, replacing those bits would not be worth while.
Photos:
