Items for sale:
[£125 posted] Shimano XTR M985 crank set, good condition. It is fitted with a 32T pass quest chainring for 1x setup and comes with a new spare too.
[£170 posted] SRAM XX shifters and mechs. All in decent condition. For 2x10spd. Rear mech takes up to 36T cassette and front mech is direct mount and was removed from a Cannondale. All parts weigh just over 500g and have carbon parts and some Ti bolts.
[£18 posted] Cannondale Hollowgram Spider SRAM XX 2x10 Mountain 80x120 BCD Silver KP128, 60g.
[£250£150 posted] Mavic Crossmax SLR 26" Lefty 1.0 Wheelset With Avid XX rotors. Wheels are in good condition. They do have some marks to spokes as you'd expect and nipples are not seized or corroded in place.
Front hub is for lefty 1.0 forks aka 50mm wide but can be used on 2.0 hubs with an adapter kit.
Rear is 135mm QR.
They run true and Freehub not worn at all.
Wheels come with 160mm up front and 140mm rear. Both are avid XX. There is one seized rotor bolt on the rear wheel but all other 11 bolts recently replaced.
Front and rear bearings replaced in June 2024.
The tyres in the photo have been sold so please note that the price is for wheels+rotors only.
[£75 posted] Cannondale Lefty PBR 90 Carbon fork + 110mm OPI stem.
Condition is heavily used. Overall mileage on the fork is around 28000 miles but has been serviced loads. Due to this, the parts which need removal during service are worn such as the lower portion of the OPI stem and the forks top cap where the pop-lock is. Pop lock is functional for locking/unlocking fork travel. Distance between clamps is 135mm and has had heli-tape on it for many years to help try to and keep fork in okay condition.
I sent the lefty fork to Race Ready Suspension in June 2024 but they said the fork was not worth servicing. The fork still functions and holds air. The lockout works. The synopsis was that the fork needed new bearings, filter and seals but due to how much milage the fork has, replacing those bits would not be worth while.
Photos:
[£170 posted] SRAM XX shifters and mechs. All in decent condition. For 2x10spd. Rear mech takes up to 36T cassette and front mech is direct mount and was removed from a Cannondale. All parts weigh just over 500g and have carbon parts and some Ti bolts.
[£18 posted] Cannondale Hollowgram Spider SRAM XX 2x10 Mountain 80x120 BCD Silver KP128, 60g.
[
Front hub is for lefty 1.0 forks aka 50mm wide but can be used on 2.0 hubs with an adapter kit.
Rear is 135mm QR.
They run true and Freehub not worn at all.
Wheels come with 160mm up front and 140mm rear. Both are avid XX. There is one seized rotor bolt on the rear wheel but all other 11 bolts recently replaced.
Front and rear bearings replaced in June 2024.
The tyres in the photo have been sold so please note that the price is for wheels+rotors only.
Condition is heavily used. Overall mileage on the fork is around 28000 miles but has been serviced loads. Due to this, the parts which need removal during service are worn such as the lower portion of the OPI stem and the forks top cap where the pop-lock is. Pop lock is functional for locking/unlocking fork travel. Distance between clamps is 135mm and has had heli-tape on it for many years to help try to and keep fork in okay condition.
I sent the lefty fork to Race Ready Suspension in June 2024 but they said the fork was not worth servicing. The fork still functions and holds air. The lockout works. The synopsis was that the fork needed new bearings, filter and seals but due to how much milage the fork has, replacing those bits would not be worth while.
Photos:
Last edited:
