MORE Middleburn help ! !

[knighty]

Ive got my Middleburn cranks through the post. I did an earlier post & Ive ordered 1 Uno 32T ring as Im running it s/s. I also ordered a 8 prong tool to get the lock nut off & re-fit the Uno ring !

Well cranks are here & its only a 2 prong lock nut !

Anyone heard of these ? If so can you get tools to get the lock nut off !

 

[wadsy]

Why not email Middleburn? I'm sure they could help.

 

[dyna-ti]

Pin spanner? :?

http://cgi.ebay.co.uk/2-PIN-ANGLE-GRIND ... 286.c0.m14

 

[knighty]

Cheers fellas I did email Middleburn but didn't hear a squeak !

I took it in the lbs he tried a pin spanner, but in the end he used two cut down spokes in a vice !

 

[DM]

What was he trying to do with 2 spokes? [edit] Sorry - I get it now [/edit]
2 prongs? Is it a fixed-gear cog lockring? Or an old bottom bracket lockring, or something?

Mine looks like this:
http://www.chainreactioncycles.com/Models.aspx?ModelID=17545

 

[ferrus]

Cheers fellas I did email Middleburn but didn't hear a squeak !

I emailed them a while ago, and got a response instantly -the same time stated as the message I'd sent. :shock:

Try em again, they seem good guys ~

 

[wadsy]

Cheers fellas I did email Middleburn but didn't hear a squeak !

I emailed them a while ago, and got a response instantly -the same time stated as the message I'd sent. :shock:

Try em again, they seem good guys ~

Likewise

 

[bwhsh8r]

a picture might help them/us as well

 

[knighty]

Im all sorted now cheers fellas I fitted it to my singlespeed so its not coming off !

 

[Mr Chicken]

Cheers fellas I did email Middleburn but didn't hear a squeak !

I took it in the lbs he tried a pin spanner, but in the end he used two cut down spokes in a vice !

so its not just me then, i sent a couple. :?