Howdy,
Change of frame means change of crankset and BB.
Cranks:
Make: Middleburn
Model: RS7
Length: 175mm
Fit: Square Taper
Spider: Red 5bolt ATB 94mm BCD (triple compatible but inner side of spider has some marking)
Spider Fit: Uno style splined.
Condition:
These cranks are in excellent usable condition, but are visibly used.
Outside of each crank has been polished by heelrub and there is no black left in the Middleburn writing.
Some chips and marks to the ends, and as stated above the the spider has marking on the inside when the small chainring would bolt onto.
The non-drive side crank has a mark by the taper where I sheared a steel BB axle in them, but have been using it fine with the taper for the past 4years since without any issues.
Pics will be taken on request.
....Offers....
Bottom Bracket:
Make: TA Specialities (need to remove it and double check to be 100%)
Spindle Length: 117.5mm
Bearings: Angular contact
Colour: Cups and lockrings black, axle raw ti.
BB fit: 68 or 73mm
Features: Adjustable chainline and bearing pre-load with lockrings.
Condition:
Perfect working order and extremely light.
Upgraded to enduro angular contact bearings last year and not ridden much since.
Some superficial markings from fitment and removal, and tight clearance.
SOLD - £30 posted -
Scar
Change of frame means change of crankset and BB.
Cranks:
Make: Middleburn
Model: RS7
Length: 175mm
Fit: Square Taper
Spider: Red 5bolt ATB 94mm BCD (triple compatible but inner side of spider has some marking)
Spider Fit: Uno style splined.
Condition:
These cranks are in excellent usable condition, but are visibly used.
Outside of each crank has been polished by heelrub and there is no black left in the Middleburn writing.
Some chips and marks to the ends, and as stated above the the spider has marking on the inside when the small chainring would bolt onto.
The non-drive side crank has a mark by the taper where I sheared a steel BB axle in them, but have been using it fine with the taper for the past 4years since without any issues.
Pics will be taken on request.
....Offers....
Bottom Bracket:
Make: TA Specialities (need to remove it and double check to be 100%)
Spindle Length: 117.5mm
Bearings: Angular contact
Colour: Cups and lockrings black, axle raw ti.
BB fit: 68 or 73mm
Features: Adjustable chainline and bearing pre-load with lockrings.
Condition:
Perfect working order and extremely light.
Upgraded to enduro angular contact bearings last year and not ridden much since.
Some superficial markings from fitment and removal, and tight clearance.
SOLD - £30 posted -
Scar
