Nader
Senior Retro Guru
thanks, I intend to do just that.lewisfoto":1gzjgfho said:I would not force it, titanium can tear. Better to try and mill .04 mm off of your post or acquire the 27mm post.
thanks, I intend to do just that.lewisfoto":1gzjgfho said:I would not force it, titanium can tear. Better to try and mill .04 mm off of your post or acquire the 27mm post.
...but bit risky for me.mkozaczek":38ac6519 said:Merlins are 27.2 period.
You need to gently pry the clamp open until the relief slot is straight up and down and the two sides are parallel. Then insert your 27.2 post.
Nader":kdbhcqu0 said:...but bit risky for me.mkozaczek":kdbhcqu0 said:Merlins are 27.2 period.
You need to gently pry the clamp open until the relief slot is straight up and down and the two sides are parallel. Then insert your 27.2 post.
ok I did it.mkozaczek":uscu9c83 said:..
Just do it. Get a nice screwdriver and insert it between the pinch bolt halves and gently apply force. Happens all the time, you'll be fine.
Nader":1hzbgq2f said:ok I did it.mkozaczek":1hzbgq2f said:..
Just do it. Get a nice screwdriver and insert it between the pinch bolt halves and gently apply force. Happens all the time, you'll be fine.
Believe me, it was not easy and that's not normal! :shock:
Now I definitely know this Merlin just needs 27 and not 27.2.