syncrosfan
Senior Retro Guru
Are the drop-outs removable? I wondered about that but I was afraid that it's a press-fit connection and didn't want to ruin a set of lowers. (drilling seemed easier)
Manitou fork timelines
- Thread starter Benandemu
- Start date
LeeDevelopment
Old School Grand Master
- Feedback
- View
Off to find an EFC fork!
misterfixit
Old School Hero
Re:
EFC is definately in the ‘95 brochure.
Richard
EFC is definately in the ‘95 brochure.
Richard
More info on disc versions.
The weird 68mm spacing is meant for Hayes brakes. Hope made a C2 No9 to fit
" Caliper #9: This caliper is to be used with Manitou forks w/ 68mm hole spacing with 165mm rotors (??). No adapter is required (bolts directly to the fork tabs)."
And also "Caliper #11: This DH4 caliper is to be used with Manitou X-Vert Carbon forks. No adapter is required (bolts directly to the fork tabs)."
Hope also make an adaptor that bolts to a C2 No1, and then fits the fork.
The weird 68mm spacing is meant for Hayes brakes. Hope made a C2 No9 to fit
" Caliper #9: This caliper is to be used with Manitou forks w/ 68mm hole spacing with 165mm rotors (??). No adapter is required (bolts directly to the fork tabs)."
And also "Caliper #11: This DH4 caliper is to be used with Manitou X-Vert Carbon forks. No adapter is required (bolts directly to the fork tabs)."
Hope also make an adaptor that bolts to a C2 No1, and then fits the fork.
