Kona Project 2 forks, which look like 1990s versions (A-C 410mm, which was slightly too short for me). They weigh in at 1040g, v/canti-brake only, 183mm steerer, 1-1/8" threadless, and in OK condition -- plenty of minor scrapes/scratches and a few small paint chips, but with plenty of life left in them yet. Asking 30 posted (or 26 delivered within 10 miles of KT17)
Next up, an STX front mech, for 31.8mm tube, top-pull, in good nick with only a few small patches of very minor surface haziness and a few surface scrapes in the cage. 7 posted. I also have the matching Shimano front trigger shifter (STX I think, but am not sure)... take both the front mech and shifter for a tenner posted
And finally, no-name alloy bar ends off a 1998 Trek 950. Decent condition but the usual outboard scrapes and scuffs. 4 posted.
Next up, an STX front mech, for 31.8mm tube, top-pull, in good nick with only a few small patches of very minor surface haziness and a few surface scrapes in the cage. 7 posted. I also have the matching Shimano front trigger shifter (STX I think, but am not sure)... take both the front mech and shifter for a tenner posted
And finally, no-name alloy bar ends off a 1998 Trek 950. Decent condition but the usual outboard scrapes and scuffs. 4 posted.
