Sorted Kona 1995 Bits

[sick-lizard]

Looking for some triple butted Project Two's circa 1995 for an 18 inch Kona Kilauea frame, so A2C 410mm & if threaded 140mm steerer?

Many Thanks

 

[sick-lizard]

After looking around online, and given frame is nude, does anyone have any of the following Kona parts they are willing to part with.

a decent dog collar, seat post clamp, seat post 27.0mm, p2s triple butted unthreaded or threaded suitable for an 18 inch with 410mm a2c.. & maybe a stem...

I have some modern bits I can use in the mean time but its seems a bit criminal putting on exotic forks etc

 

[leapgate]

After looking around online, and given frame is nude, does anyone have any of the following Kona parts they are willing to part with.

a decent dog collar, seat post clamp, seat post 27.0mm, p2s triple butted unthreaded or threaded suitable for an 18 inch with 410mm a2c.. & maybe a stem...

I have some modern bits I can use in the mean time but its seems a bit criminal putting on exotic forks etc

I've got a '94 TB P2 for an 18" frame and I may have a seat post off a low end Kona from that year too, but I don't think it's branded.

 

[sick-lizard]

Thanks for responding!

The 94 P2's sound like they could do the trick assuming same a2c etc, do you have any photos & how much would you be looking for...

The seat post I guess I'm looking for a non ti o beam, finding it a bit confusing seeing some Kalloy (thumbs up?) and Tahoma(race lite?) available in 27.0 on the bay

 

[bold stelvis]

was in the same boat recently - 94 forks will do fine - no change on the specs between 94 to 97 essentially so any of those years should be good (earlier P2's are not suspension corrected so will be 15mm shorter AC)

if threaded just double check the head tube length, - 140mm sounds about right for an 18 inch (I needed 160ish for my 19 inch which has a 20mm longer head tube)

 

[Spanky22b]

After looking around online, and given frame is nude, does anyone have any of the following Kona parts they are willing to part with.

a decent dog collar, seat post clamp, seat post 27.0mm, p2s triple butted unthreaded or threaded suitable for an 18 inch with 410mm a2c.. & maybe a stem...

I have some modern bits I can use in the mean time but its seems a bit criminal putting on exotic forks etc

I can help you out for most of the parts, did you buy the 95 Kilauea what was for sale on here?

 

[sick-lizard]

Ace Yes I'm the guilty party, hopefully arriving by Wednesday

 

[Spanky22b]

Ace Yes I'm the guilty party, hopefully arriving by Wednesday

Nice one I should be able to help you out then i've got quite a few spares of what your after,i'll send you a message when i get in from work

 

[sick-lizard]

A big Thanks to @Spanky22b

Forks
Headset
Seat post Cable Guide
Seat post clamp
all sorted plus wheels, new cassette & Mr Dirt and The Cleaner tires.

a 95 stem should also be winging its way to me...

Just the illusive o-beam left... maybe lol

 

[leapgate]

Thanks for responding!

The 94 P2's sound like they could do the trick assuming same a2c etc, do you have any photos & how much would you be looking for...

The seat post I guess I'm looking for a non ti o beam, finding it a bit confusing seeing some Kalloy (thumbs up?) and Tahoma(race lite?) available in 27.0 on the bay

Hey, sorry for slow reply, I see you're sorted for some forks now

Unfortunately the post I have is one of the cheaper ones, a Kalloy I think, good luck in the search for an O Beam!