Klein Attitude MC1 forks press in

[sorgini]

Hi, i want to assemble my Attitude after repaint of forks and MC1. So i read it needed a special loctite for bearings and the press in tool. I got different loctite here but not the special one for bearings ,can i use an other one? How about the MC1 tool, are there other ways to press the forks in?

Cheers

Florian

 

[Baldyz1]

Re:

Be careful to use the right one as some set quickly and you cannot get the fork in quick enough you need one that does not set. Its a blue one I believe and its the same as the BB Bearings. Vinevo may have some.

If the forks have been in and out they will pretty much drop in if the surfaces are clean. If in any doubt get a really good local bike shop to press it all in, it may save you from a dreaded mistake.

Thanks

 

[pinguwin]

look it up in the Klein technical manual: http://www.google.com/url?sa=t&rct= ... mp;cad=rja

It's not blue loctite rather red loctite. Use type RC 680 as mentioned in the manual.

 

[mkozaczek]

A Pingwi, glad to see you still lurking around here