Wanted FSA carbon cranks isis

[Nbike19]

Isis cranks ideally with bb
Set like these would be nice other brands considered, I can’t run 30mm
https://www.ebay.co.uk/itm/35584823...EFSVxTh8YA9xUBsKESTNcKfEc=|tkp:Bk9SR_bm5fypZA

 

[Bultaco370]

What length crank arms? Do you want 175 or would 170mm be ok?

I have a 170mm Zipp carbon chainset with 39/49 130BCD chainrings. I have the original Zipp BB plus a Stronglight Twister BB and an FSA BB (this one is not very smooth but has no play in the bearings). Looking for £150 for the lot.

 

[Nbike19]

Hi thanks but way out of my budget,not a high end bike

 

[walkmanman]

I'd also ask what length cranks you'd prefer (or if length doesn't bother you) as I have a set of FSA carbon cranks and (Isis splined BB) but can't remember the length. Also, what length BB axle would suit the bike you'll be using? Although I don't know if the Isis BB might only have came with triple and double lengths for their axles?

 

[Nbike19]

108mm is good open to crank length thankyou

 

[walkmanman]

Righto, well I'll check what length my BB's axle is, suspect it will be 108mm. But one thing to mention is I have the BB and cranks fitted to a frame and obvs will need to remove them if you decide to buy. But I don't suppose you'd know if a crank puller that removes Octalink splined cranks would also work on Isis ones? They're a similarly splined design but could still have different tools, and I'm also cautious due to never having removed any Isis cranks before. But I can send you pics of the cranks whilst fitted to the frame before doing anything else.

 

[bikeworkshop]

Hi thanks but way out of my budget,not a high end bike

If its not a high end bike, won't a carbon chainset be out of place?
They don't offer much advantage over decent cast alloy, but likely to cost more