I've been forced to consolidate some more of my bike related stuff at home due to a storage issue at work. First to go are the contents of the plastic box I've been tripping over at night :facepalm:
Prices include UK postage. Note that I'll use Hermes via a drop off store - namely my local 'Smoker's Paradise'), as all my local PO's are currently closed. They seem fairly reliable (so far) but items may take a bit longer to reach you, I'll have tracking of course and discounts are available for multiple items
Here we go...
Deore II front mech, 28.6 clamp, BP. Looks pretty good and works well, slight surface rust on bolts £10.00
Job lot of Deore DX brake units (x2 pairs), minus the shifter pods. One set missing the brake barrel adjusters as well. Could be modified and levers painted/polished up to make good? £8.00
Deore LX M567 rear mech (8 speed). Rough cosmetically but seemed to work okay when I last used it, currently with M735 XT jockey wheels. Pictured with missing barrel adjuster but I'm sure I have one to fit somewhere. Good for pub bike? £5.00
Diacompe 987 F+R brake spares in black, mostly all there bar pads and a bit of the hardware. Arms have been touched up but look pretty neat. Ideal if you want to swap the colour of an existing set you have? £5.00
Kinex JIS bottom bracket, 68mm shell 197mm axle. Not too bad, one cup a bit chewed but fits a tool fine, bearings still okay £5.00
2x Shimano Cassettes 11-28t. One is missing the lower two cogs, but maybe has slightly less wear on the remaining sprockets compared to the other. Mix and match? £6.00
Shimano SG outer chainring, 46 tooth 110 bcd. Seen plenty of action but still works okay. Used until recently for a ghetto SS parts bin build £3.00
SOLD ITEMS
Complete set of Deore DX low profile brakes (M650). All bolts and link wires provided. Pads are original and still have a bit of life, you may wish to switch these though £13.00
Girvin Flexstem in silver, 100mm length and 1" quill. Not sure how much flex left but all complete and useable, paint a bit ratty. Would be good for a quill transplant though £10.00
31.6 black generic seatpost (matt finish), unused. 320mm shaft length, 350mm overall £8.00
26.6 silver Kalin seatpost, unused as the wrong size! Slight scuffing at the very bottom as I discovered the wrong size thing...270mm shaft length / 300mm overall £8.00
Orange Hot Rod bars from around '97. 580mm length and uncut. Decals and finish a but scuffed £8.00
Suntour wheel QR skewers with rubber hoods. Not sure which groupset these were from but think maybe XC Pro - they were fitted to a high end Trek Matrix/Bullseye wheelset that I scored. Slightly scuffed but pretty nice overall £8.00
Original Crud Guard, well used but still works well. Rivets that attached the alloy stays went AWOL ages ago, replaced by purple fairing bolts £7.00
UN51 Bottom bracket 73mm shell 122.5 axle. Still nice and smooth with just a but of corrosion on the outer shell, complete with crank bolts £7.00
Kona Dewey bar ends, quite hard to come by! Need repainting £5.00
Specialized bottle cage, Japan stamped. Has seen plenty of bottles I think!
Suntour XC Ltd mech, 28.6 clamp and bottom pull. Limit screws are seized so doesn't engage into granny. Okay as a double though.
Prices include UK postage. Note that I'll use Hermes via a drop off store - namely my local 'Smoker's Paradise'), as all my local PO's are currently closed. They seem fairly reliable (so far) but items may take a bit longer to reach you, I'll have tracking of course and discounts are available for multiple items
Here we go...
Deore II front mech, 28.6 clamp, BP. Looks pretty good and works well, slight surface rust on bolts £10.00
Job lot of Deore DX brake units (x2 pairs), minus the shifter pods. One set missing the brake barrel adjusters as well. Could be modified and levers painted/polished up to make good? £8.00
Deore LX M567 rear mech (8 speed). Rough cosmetically but seemed to work okay when I last used it, currently with M735 XT jockey wheels. Pictured with missing barrel adjuster but I'm sure I have one to fit somewhere. Good for pub bike? £5.00
Diacompe 987 F+R brake spares in black, mostly all there bar pads and a bit of the hardware. Arms have been touched up but look pretty neat. Ideal if you want to swap the colour of an existing set you have? £5.00
Kinex JIS bottom bracket, 68mm shell 197mm axle. Not too bad, one cup a bit chewed but fits a tool fine, bearings still okay £5.00
2x Shimano Cassettes 11-28t. One is missing the lower two cogs, but maybe has slightly less wear on the remaining sprockets compared to the other. Mix and match? £6.00
Shimano SG outer chainring, 46 tooth 110 bcd. Seen plenty of action but still works okay. Used until recently for a ghetto SS parts bin build £3.00
SOLD ITEMS
Complete set of Deore DX low profile brakes (M650). All bolts and link wires provided. Pads are original and still have a bit of life, you may wish to switch these though £13.00
Girvin Flexstem in silver, 100mm length and 1" quill. Not sure how much flex left but all complete and useable, paint a bit ratty. Would be good for a quill transplant though £10.00
31.6 black generic seatpost (matt finish), unused. 320mm shaft length, 350mm overall £8.00
26.6 silver Kalin seatpost, unused as the wrong size! Slight scuffing at the very bottom as I discovered the wrong size thing...270mm shaft length / 300mm overall £8.00
Orange Hot Rod bars from around '97. 580mm length and uncut. Decals and finish a but scuffed £8.00
Suntour wheel QR skewers with rubber hoods. Not sure which groupset these were from but think maybe XC Pro - they were fitted to a high end Trek Matrix/Bullseye wheelset that I scored. Slightly scuffed but pretty nice overall £8.00
Original Crud Guard, well used but still works well. Rivets that attached the alloy stays went AWOL ages ago, replaced by purple fairing bolts £7.00
UN51 Bottom bracket 73mm shell 122.5 axle. Still nice and smooth with just a but of corrosion on the outer shell, complete with crank bolts £7.00
Kona Dewey bar ends, quite hard to come by! Need repainting £5.00
Specialized bottle cage, Japan stamped. Has seen plenty of bottles I think!
Suntour XC Ltd mech, 28.6 clamp and bottom pull. Limit screws are seized so doesn't engage into granny. Okay as a double though.