Some nice forks for sale.
Pace RC35s.I think these date from around 1996. Very nice condition and with the desirable alloy steerer. Adjustment for rebound damping. Canti pivot wotsit included. These can be used with V-brakes or cantis. Unthreaded alloy steerer 1in diameter, 210mm long. These were fitted to my 21in Orange P7 so should be long enough for most frames. Note that the steerer is removeable and can be substitued for a 1 1/8 or 1 1/4 steerer.
£75 (add £5 for P & P). NOW SOLD
Marin Rockstar Cromo fork in black powder coat with uncut steerer for Aheadset. Barely used and in fine condition. Spinner name on cast dropouts. Uncut and unthreaded steerer, 260mm x 1 1/8in, axle to crown 410mm. £20. (add £5 for P & P). SOLD
Marin Rockstar in 7304 steel, nickel plated.
These are very lightweight and have a threaded steerer for traditional headset. Date-stamped 1983. Spinner name on cast dropouts. Nickel plate is in good condition so will come up nicely when stripped and re-lacqueed.
Steerer 1 1/8in x 153mm (including 30mm threaded section), axle to crown 390mm. £20 (add £5 for P &P)
Pace RC35s.I think these date from around 1996. Very nice condition and with the desirable alloy steerer. Adjustment for rebound damping. Canti pivot wotsit included. These can be used with V-brakes or cantis. Unthreaded alloy steerer 1in diameter, 210mm long. These were fitted to my 21in Orange P7 so should be long enough for most frames. Note that the steerer is removeable and can be substitued for a 1 1/8 or 1 1/4 steerer.
£75 (add £5 for P & P). NOW SOLD
Marin Rockstar Cromo fork in black powder coat with uncut steerer for Aheadset. Barely used and in fine condition. Spinner name on cast dropouts. Uncut and unthreaded steerer, 260mm x 1 1/8in, axle to crown 410mm. £20. (add £5 for P & P). SOLD
Marin Rockstar in 7304 steel, nickel plated.
These are very lightweight and have a threaded steerer for traditional headset. Date-stamped 1983. Spinner name on cast dropouts. Nickel plate is in good condition so will come up nicely when stripped and re-lacqueed.
Steerer 1 1/8in x 153mm (including 30mm threaded section), axle to crown 390mm. £20 (add £5 for P &P)
