Justakidwithanoldbike
Retro Newbie
So, I am in quite a pickle, a while back I bought an old Cannondale gemini 1000 to get into downhill, now this bike had a set of first gen mavic deemaxes on it, however I didn’t really know what i was getting into and now Ive been stuck with a broken rear axle…
Anybody have a first gen deemax rear axle or hub for sale even? I’m really desperate and just wanna be able to ride again… even a different hub that could be suitable to replace would be great
Mavic part number for the axle is m40175
My dropout spacing(width between dropouts is 6 inches from the outside to the outside
And roughly 5-3/8 from the inside to inside
Sorry if this is a little confusing but I’m not really sure what to put
Wheels are 36 h if a separate hub is in the picture
I believe the hub is 135 mm?
As you can tell I’m not very knowledgeable on this stuff…
Anybody have a first gen deemax rear axle or hub for sale even? I’m really desperate and just wanna be able to ride again… even a different hub that could be suitable to replace would be great
Mavic part number for the axle is m40175
My dropout spacing(width between dropouts is 6 inches from the outside to the outside
And roughly 5-3/8 from the inside to inside
Sorry if this is a little confusing but I’m not really sure what to put
Wheels are 36 h if a separate hub is in the picture
I believe the hub is 135 mm?
As you can tell I’m not very knowledgeable on this stuff…
Last edited: