Correct Mavic sticker placement.

[Stick Legs]

Hi,
I have found some new stickers for my Open 4 CD rims.
The question is what is their correct orientation?
I would imagine that if they were 'the right way up' when viewed from the drive side of the wheel, when at the bottom.
Also I have some if the MA VIC italic decals to use, should these be next to the Open 4 CD sticker or by the valve?
Thanks.

 

[Stick Legs]

Re:

http://cyclomondo.net/page14.htm
Where I found the Mavic stickers.

 

[glorfingal]

found this ... http://www.mytenspeeds.com/My_TenSpeeds ... calRim.jpg which seems to show the yellow/light blue Mavic Open 4 CD stickers are opposite the valve (unless this guys' rims are
cracked !!)

 

[47p2]

This should clear things up for you

 

[foz]

The model stickers should be opposite the valve, covering the rim joint. It doesn't matter which way round they are, unless the wheel is already built

There were different types of large "MAVIC" sticker - here's a pic of some pro edition mach 2 cd 2's I had, where it's shown next to the valve hole (but not right over the valve hole, as they'd get messes up when inflating the tubs)

I've also seen a version in large white letters, with one letter per spoke, as in the pic of the wolber wheels

Andy

 

[Stick Legs]

Re:

Thanks guys.
Yes the wheels are built. I knew the model sticker went over the rim joint, it was the MA VIC I was curious about.
Thanks for the pics,